SOLICITATION NOTICE
34 -- SYSTEM 3RTOOLING FOR WIRE EDM
- Notice Date
- 6/27/2007
- Notice Type
- Solicitation Notice
- NAICS
- 423830
— Industrial Machinery and Equipment Merchant Wholesalers
- Contracting Office
- NASA/Goddard Space Flight Center, Code 210.M, Greenbelt, MD 20771
- ZIP Code
- 20771
- Solicitation Number
- NNG0707264Q
- Response Due
- 7/12/2007
- Archive Date
- 6/27/2008
- Small Business Set-Aside
- Total Small Business
- Description
- NASA/GSFC has a requirement for the following items: - Qty: 2 P/N: 3R-200.2J-1 Description: 382mm long Master Tooling Base Dovetail,complete with Mounting Hardware and Integrated End Stop - Qty: 2 P/N: 3R-200.4J-1 Description: 490mmmm long Master Tooling Base Dovetail, complete with Mounting Hardware and Integrated End Stop - Qty: 2 P/N: 3R-239-465 Description: 465mm Long 3Ruler, complete with Anchor Clamps, Zeroline Supports, 5+Zeroline Supports, End Stop Toe Clamps and Mounting Hardware - Qty: 2 P/N: 3R-261.1 Description: Horizontal Sliding Support, complete with 5+Zeroline Spacer, Toe Clamp and Mounting Hardware - Qty: 1 P/N: 3R-294.2 Description: Edge Vise. Suitable for mounting to any 3Ruler Device or to a Macro Pallet for Turn and Burn Applications - Qty: 2 P/N: 3R-605.1RS Description: Stainless Steel Macro Drawbar. Suitable for use if the B-Axis is equipped with a Macro Pneumatic Chuck - Qty: 2 P/N: 3R-605.2RS Description: Stainless Steel Macro Drawbar. Suitable for use if the B-Axis is equipped with a Macro Mechanical Chuck - Qty: 1 P/N: 3R-659.16-P Description: Macro-mounted Collet Holder suitable for ER-16 Collets. Size range from .020??-.0393??. - Qty: 1 P/N: HS003 Description: Stainless Steel Hermann Schmidt Three Jaw Chuck,mounted to a 3R-601.7-P Macro Pallet. Clamping Range .020?? -1.0??, with a repetition accuracy of +/-.00001?on parts of the same diameter. - Qty: 1 P/N: SAV1 Description: Stainless Steel SAV Three Jaw Scroll Chuck, mounted to a 3R-601.7-P Macro Pallet. Clamping range ?Jaws In?: .020?? -.0393??. Clamping Range ?Jaws Reversed?: .63?? -1.93?? Repetition accuracy clamping parts of the same diameter:+/-.0008? - Qty: 1 P/N: 3R-613.6 Description: Macro Mounted Stainless Steel Centering Vise with 0?-3.14? Clamping Capacity - Qty: 1 P/N: 3R-606.2 Description: Macro-mounted Master Control Tool used to square, qualify and locate the Macro Chuck on the B-Axis in the Wire EDM Machine - Qty: 1 P/N: 3R-226.6 Description: Macro Adapter to allow existing Vises to be used in Turn and Burn applications in the B-Axis. - Qty: 1 P/N: 3R-466.40RS Description: Stainless Steel Macro to Macro Junior Adapter Chuck - Qty: 1 P/N: 3R-602.27-1 Description: Stainless Steel Manual Clamp Macro Lever Chuck on Dovetail. Used with existing adapters, this device will allow turn and burn Fixturing to be held in the existing Charmilles and Elox Wire EDM machines - Qty: 1 P/N: 3R-204 Description: Vertical Adapter. Used with existing adapters to raise the 3R-602.27-1 above or below the zeroline of the existing Charmilles and Elox Wire EDM machines - Qty: 1 P/N: 3R-RU52 Description: Set of Ten Rubber Chip Shields for 54mm x 54mm Macro Pallets - Qty: 1 P/N: 3R-RU70 Description: Set of Ten Rubber Chip Shields for 70mm x 70mm Macro Pallets This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, which is issued as a Request for Quotation (RFQ); quotes are being requested and a written solicitation will not be issued. Offerors are required to use the On-Line RFQ system to submit their quote. The On-line RFQ system is linked above or it may be accessed at http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin= . The information required by FAR Subpart 12.6 is included in the on-line RFQ. The Government intends to acquire a commercial item using FAR Part 12 and the Simplified Acquisition Procedures set forth in FAR Part 13. Questions regarding this acquisition must be submitted in writing Candis.J.Edwards-Duncan@nasa.gov no later than 07/06/2007. It is the quoter's responsibility to monitor this site for the release of amendments (if any). Potential quoters will be responsible for downloading their own copy of this notice, the on-line RFQ and amendments (if any). An ombudsman has been appointed - See NASA Specific Note "B". Any referenced notes may be viewed at the following URLs link below.
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=51#125562)
- Record
- SN01329543-W 20070629/070628032012 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |