MODIFICATION
95 -- Amendment of Solicitation
- Notice Date
- 6/13/2007
- Notice Type
- Modification
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- US Engineer District, St. Paul, Contracting Division CEMVP-CT, 190 East Fifth Street, St. Paul, MN 55101-1638
- ZIP Code
- 55101-1638
- Solicitation Number
- W912ES-07-T-0071
- Response Due
- 6/20/2007
- Archive Date
- 8/19/2007
- Small Business Set-Aside
- Service-Disabled Veteran-Owned
- Description
- SUMMARY OF CHANGES SECTION SF 1449 - CONTINUATION SHEET SOLICITATION/CONTRACT FORM The required response date/time has changed from 15-Jun-2007 03:00 PM to 20-Jun-2007 03:00 PM. Section 3.6.3 (Horizontal and Vertical Camber) of the scope of work is changed to read: Section 3.6.3 Down Stream Sill Beam Assembly Deviation from Zero Plane: The downstream sill beam assembly is intended to form the bottom sealing surface for a stack of stop logs and therefore must hold back water. The tolerances specified in this scope of work in some cases are more stringent than the A.I.S.C. allowable toler ances for bridges and buildings. The downstream sill beam maximum allowable deviation from zero plane is +/- 1/16 of an inch over any 20 foot span. Deviation from zero plane of more than ? over the entire 110 foot length will be cause for rejection. Drawing number G-002 specifies ASTM A276 Type 304L SS which is for bar stock. The specificaion should read ASTM A240 Type 304L SS which is for plate.
- Place of Performance
- Address: US Engineer District, St. Paul Contracting Division CEMVP-CT, 190 East Fifth Street St. Paul MN
- Zip Code: 55101-1638
- Country: US
- Zip Code: 55101-1638
- Record
- SN01317952-W 20070615/070613221519 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |