MODIFICATION
71 -- NAVOCEANO MSRC Customize 5 operator console and 1 supervisor desk
- Notice Date
- 3/26/2007
- Notice Type
- Modification
- NAICS
- 337212
— Custom Architectural Woodwork and Millwork Manufacturing
- Contracting Office
- General Services Administration, Federal Technology Service (FTS), Federal Technology Service (4TRC), 4890 University Square, Ste 3F, Huntsville, AL, 35816, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- 4THO17078074
- Response Due
- 3/30/2007
- Archive Date
- 4/14/2007
- Description
- This requirement is for a cusomtomized 5 operator console and 1 supervior desk in support of the NAVOCEANO Major Resource Center at Stennis Space Center, MS. (1) Quote shall be submitted as an open market requirement. (2) Quote shall include GSA order ID number 4THO17078074. (3) Quote must be valid for 30 calendar days after submission. (4) New equipment only, NO remanufactured products, and NO ?gray market? items. Ensure that all items will be covered by the manufacturer?s warranty. (5) Quote per specifications requested. If an item has been discontinued or is end of life, annotate quote referencing as such then quote an equal or better replacement for the item. (6) Quote is to include all fees, including shipping or freight costs. (7) Provide on quote the estimated ETA, number of days, delivery can be expected after receipt of purchase order. (8) No partial shipments unless specifically authorized at time of award. (9) All services and products provided in response to this requirement shall comply with Section 508 of the Rehabilitation Act of 1973 (29 U.S.C. 794d) and the Architectural and Transportation Barriers Compliance Board Electronics and Information Technical (EIT) Accessibility Standard (36 CFR part 1194). Quote must include statement addressing compliance or noncompliance with Section 508. (10) Quote must include verification that the product and/or service has been evaluated and validated by the NSA or in accordance with NSA-approved processes in accordance with Defense Confidentiality DCAS-1 (see also DODI 8500.2, February 6, 2003). Reference URL: http://www.dtic.mil/whs/directives/corres/html/85002.htm for NSA compliance information. (11) Offeror?s must be registered in the Central Contract Register (CCR). Offeror should provide statement that CCR registration is current. (12) Failure to comply with the above instructions may result in quote being determined as non-responsive. It is mandatory that all responding vendors be registered in GSA's IT-Solutions Acquisition System (ITSS). The website is http://it-solutions.gsa.gov. The HelpDesk # is 1-877-243-2889. Failure to register in ITSS will result in your company not being solicited. A. Scope of Contract: The purpose of this Request for Proposal is to acquire customized furniture as requested by the customer for Solicitation Number 4THO17078074. The customized furniture being procured is; 1 (5 Operator) Console and 1 Supervisor Desk. B. The contractor shall perform the following tasks: 1. Deliver the Console, Supervisor Desk and all components as indicated in the attached Bill of Materials. 2. Install the furniture at Stennis Space Center in Mississippi Bldg 9323 Room 103 as indicated in the Statement of Work. 3. Potential offers shall request a copy of the drawings from Ms. Brandi Barnes at brandi.barnes@gsa.gov C. Period of Performance: Delivery shall be 6 weeks after receipt of order as indicated on the SF1449. Installation shall not exceed two (2) work days. D. Bill Of Material ITEM QUANTITY DESCRIPTION 1 1 Five (5) Computer Operator Console 2 1 One (1) Supervisor Desk E. Specifications: In the event of a conflict between the furniture dimensions mentioned in the Statement of Work and the dimensions listed on the drawings, the dimensions of the drawings will take precedence. Command Center Consoles for Data Center operations ? Command Consoles shall be capable of supporting specified electronics ? Command Consoles shall have an adjustable monitor shelf: The front adjusts 4 inches (102mm) at 1 inch (25mm) increments vertically. The rear adjusts 4 inches (102mm) at .5 inches (13mm) increments vertically. Maximum tilt is 20 degrees. ? Command Consoles shall be comprised of floor mounted pedestals, horizontal support chase and decorative frames, with a front and rear enclosure assembled together to form a command console. ? Lower Front doors and enclosure assembly shall be locking and enclosure a shelf. Lower doors shall be solid type, 18 gauge steel door with welded hat channel stiffeners. Doors shall open 180 degrees from either the right or left side. Lock shall be lever latch type. Shelf shall be available as a pullout. 18 gauge steel shelf shall extend 14 (356mm) inches from the face of the console and requires a 140 lbs load capacity. ? Rear enclosure assembly shall be locking and same as above except vented. ? Command Console shall have a minimum 1? (25mm) thick MDF core, PVC work surface. The work surface shall be not less than 18 inches (457mm) deep overall and should include a 1 ? (44mm) deep beveled edge covering the work surfaces entire front width. ? Command Center compartment shall allow for a minimum of 20 degree slope away from the operator for all electronics placed above 26 inch (661m) from the floor level. ? All components shall be pre engineered modular construction ? Warranty shall be ten years against defects of all components, parts, material and workmanship under normal use. ? Finish and color ? Color Cherry Wood with Port Color Laminate 1 Supervisor Desk 1 ea 60?W basic slim-line console 1 ea 90?W basic slim-line console 1 ea Short decorative end frame, RH 1 ea Laminated side panel 1 ea Laminated side panel 1 pr Upper lam sides for 51016 1 st Side panel retainers, 2nd tier 1 pr End frames for 2 tier slimline 1 ea Double tier intermediate frame 1 ea 90 degree base corner 3 pr Work surface support brackets 1 ea 90 degree corner, lam work surface 1 ea 18?D work surface ? 60?W chase 1 ea 18?D work surface ? 90?W chase 1 pr Oak edging for 18?D shelf 1 ea 56? monitor shelf 1 ea 86? monitor shelf 1 pr Hinged duct cover, 60?
- Place of Performance
- Address: Bldg 9323 Room 103, Stennis Space Center, MS
- Zip Code: 39522
- Country: UNITED STATES
- Zip Code: 39522
- Record
- SN01259506-W 20070328/070326221009 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |