PRESOL | 93 | Polymerization of Pour Foams - Two rigid, expanding polyurethane foams are needed to repair three 5 ft by 5 ft and four 8 ft by 8 ft bomb craters.

FBO DAILY ISSUE OF MARCH 02, 2007 FBO #1922
SOLICITATION NOTICE

93 -- Polymerization of Pour Foams - Two rigid, expanding polyurethane foams are needed to repair three 5 ft by 5 ft and four 8 ft by 8 ft bomb craters.

Notice Date: 2/28/2007
Notice Type: Solicitation Notice
NAICS: 326150 — Urethane and Other Foam Product (except Polystyrene) Manufacturing
Contracting Office: Vicksburg Consolidated Contracts Office, Vicksburg, ATTN: ERDC, 4155 Clay Street, Vicksburg, MS 39183-3435
ZIP Code: 39183-3435
Solicitation Number: W81EWF-7038-5960
Response Due: 3/15/2007
Archive Date: 5/14/2007
Small Business Set-Aside: Total Small Business
Description: The Engineer Research & Development Center, Airfields and Pavement Branch (APB) of the Geotechnical and Structures Laboratory, has a requirement for Polymerization of Pour Foams. Two rigid, expanding polyurethane foams are needed to repair three 5 ft by 5 ft and four 8 ft by 8 ft bomb craters. Adequate strength and expansion ratios are needed for these materials to support a 32,325 lb weight within a pavement structure. These foams need to expand several times their original volume (unreacted) and p rovide densities of 8 and 15 pcf, respectively to provide adequate strength in the field. The foam must be delivered prior to March 26. Product Specification: 1. Four gallons Foam A - Must be a rigid polyurethane foam (closed-cell); Minimum density of 15 pcf; Minimum expansion ratio of 4; Demoldable in less than 1 hour; Maximum individual components to initiate foam reaction is 2; Water must not be necessary to activate foam expansion; Material must be mixable by hand or drill; Material must be pourable (not injection); The product identified in laboratory testing was Foam-iT 15. 2. Four gallons Foam B - Must be a rigid polyurethane foam (closed-cell); Density of 8 pcf; Minimum expansion ratio of 5; Demoldable in less than 1 hour; Maximum individual c omponents to initiate foam reaction is 2; Water must not be necessary to activate foam expansion; Material must be mixable by hand or drill; Material must be pourable (not injection); The product identified in laboratory testing was Pour Foam 8. 3. Five F oam IT Drum Units. 4. Shipping charges if FOB Origin. Specifications of the products quoted shall be furnished with the quote. The award will be make on or about March 20, 2007. If you are interested in submitting a quote, call Brenda J. Raphelt at 601 /631-7905 or email at Brenda.J.Raphelt@mvk02.usace.army.mil.
Place of Performance: Address: Vicksburg Consolidated Contracts Office, Vicksburg ATTN: ERDC, 4155 Clay Street Vicksburg MS; Zip Code: 39183-3435; Country: US
Record: SN01240969-W 20070302/070228221306 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

93 -- Polymerization of Pour Foams - Two rigid, expanding polyurethane foams are needed to repair three 5 ft by 5 ft and four 8 ft by 8 ft bomb craters.