SOLICITATION NOTICE
28 -- SHAFT,TURBINE,AIRCR
- Notice Date
- 11/21/2006
- Notice Type
- Solicitation Notice
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; 3001 STAFF DR STE 2AG1 109B; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8104-07-Q-0092
- Response Due
- 12/8/2006
- Archive Date
- 2/19/2007
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20300780467 Item: 0001 NSN: 2840011873189PNPN SHAFT,TURBINE,AIRCR P/N: 301-579-120-0, Description: Shaft Turbine Aircraft is a one piece steel alloy forging that is supported by the No. 1 and No. 2 bearings. The function of the Shaft Turbine Aircraft is it's front flange provides for attachment with the fan disk. Mechanical coupling with the low pressure turbine (LPT) shaft is provided by inner drive splines and an inner shoulder for axial retention of the PLT shaft when clamped by a coupling nut threaded to the LPT shaft. The shaft is fitted with a rotating air/oil separator, mounted between the No. 1 and No. 2 bearings seperating the oil from the air vented from the engine forward sump into the engine center vent system. The dimensions are length 29 inches, width 14 inches, and circumference is 48 inches on the outer diameter. The shaft turbine aircraft consists of titanium alloy forgings. Total Line Item Qty: 1.0000 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31OCT2007, 1.00 PR Number(s): 2840011873189PN, FA810407Q0092, FA810407Q0092, FD20300780467 Item: 0002 NSN: 2840011873189PNPN SHAFT,TURBINE,AIRCR P/N: 301-579-120-0, Description: Shaft Turbine Aircraft is a one piece steel alloy forging that is supported by the No. 1 and No. 2 bearings. The function of the Shaft Turbine Aircraft is it's front flange provides for attachment with the fan disk. Mechanical coupling with the low pressure turbine (LPT) shaft is provided by inner drive splines and an inner shoulder for axial retention of the PLT shaft when clamped by a coupling nut threaded to the LPT shaft. The shaft is fitted with a rotating air/oil separator, mounted between the No. 1 and No. 2 bearings seperating the oil from the air vented from the engine forward sump into the engine center vent system. The dimensions are length 29 inches, width 14 inches, and circumference is 48 inches on the outer diameter. The shaft turbine aircraft consists of titanium alloy forgings. Total Line Item Qty: 1.0000 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31OCT2007, 1.00 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 31OCT2007, 1.00 The proposal due date will be:08DEC2006 Electronic procedure will be used for this solicitation. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for Written Quotation will be issued. The anticipated award date will be 60 days after the issuance of this notice. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. See Note(s) 22 and 25.
- Record
- SN01184873-W 20061123/061121220633 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |