SOLICITATION NOTICE
A -- CERAMICS PARTS FOR THE SAMPLE ANALYSIS AT MARS PROJECT
- Notice Date
- 11/16/2006
- Notice Type
- Solicitation Notice
- NAICS
- 334419
— Other Electronic Component Manufacturing
- Contracting Office
- NASA/Goddard Space Flight Center, Code 210.M, Greenbelt, MD 20771
- ZIP Code
- 20771
- Solicitation Number
- NNG07160156R
- Response Due
- 1/2/2007
- Archive Date
- 11/16/2007
- Small Business Set-Aside
- N/A
- Description
- NASA/GSFC plans to issue a Request for Proposal (RFP) for the fabrication of interchangeable, dynamic, nano-size, yitra stabilized Zirconia (Y-TZP) and Magnesia Partially Stabilized Zirconia ? TS Grade (Mg-PSZ-TS), ceramic parts for the Sample Analysis at Mars Project (SAM) Micro-valve Instrument build. <BR> All Bobbins and Washers will be evaluated based on their conformance to the specifications below (All drawings will be attached to the RFP) <BR> 140 Upper Bobbins/140 Lower Bobbins Both the upper and lower bobbins (part #s 2086779 and 2086782) need to be machined from Magnesia Partially Stabilized Zirconia, Thermally Stable Grade (TS). The tolerances as shown on the drawing must be maintained, with a default tolerance of +/- 0.002? (note there are locations where + .001?, - .000? must be held). No visible cracking or flaking of material may be present. Internal under-cut radius must not exceed .004? max. Machine sharp corners everywhere except where indicated on drawings. Finish part surfaces are to be flat and parallel within 0.001?. Bag Part IAW MIL-STD-2073-1 Method 10, and tag with part number ?2086779? and ?2086782? respectively. <BR> 1,000 Belleville Washers The Belleville washers (part # 2086788) need to be machined from Inconel X-750 AMS 5667 to the final dimensions. Cold forming cannot be used to achieve the ?upturned? condition. No additional stresses may be induced into the part after machining. The parts must be held to a tolerance of +/- 0.001?. Inside diameter must be concentric to outside diameter. Inside and outside surface must be concentric and parallel to inside diameter. Bag Part IAW MIL-STD-2073-1 Method 10, and tag with part number ?2086788?. <BR> Award will be made on the basis of cost/price and other factors, i.e., technical quality, past performance, and cost/price to determine best value to the Government. <BR> <BR> This request for proposals will be conducted as a full and open competition. <BR> The Government does not intend to acquire a commercial item using FAR Part 12. See Note 26. <BR> The NAICS Code and Size Standard are 334419 and 500 employees, respectively. <BR> All responsible sources may submit an offer which shall be considered by the agency. <BR> An ombudsman has been appointed -- See NASA Specific Note "B". <BR> The solicitation and any documents related to this procurement will be available over the Internet. These documents will reside on a World Wide Web (WWW) server, which may be accessed using a WWW browser application. The Internet site, or URL, for the NASA/GSFC Business Opportunities home page is http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=51 <BR> Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the Internet site for the release of the RFP and amendments (if any). Potential offerors will be responsible for downloading their own copy of the RFP and amendments (if any). Any referenced notes may be viewed at the following URLs linked below. <BR><BR> All contractual technical questions must be submitted in writing (e-mail or fax). Telephone questions will not be accepted. <BR><BR> The anticipated release date of the Request for Proposal is on or about 12/1/06 with an anticipated offer due date of on or about 1/2/06.
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=51#122750)
- Record
- SN01182615-W 20061118/061116221218 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |