SOLICITATION NOTICE
53 -- Folding Tables for Shelter
- Notice Date
- 9/18/2006
- Notice Type
- Solicitation Notice
- Contracting Office
- N68936 Naval Air Warfare Center Weapons Division Dept. 3 575 I Ave, Suite 1 Point Mugu, CA
- ZIP Code
- 00000
- Solicitation Number
- N6893606T0377
- Response Due
- 9/26/2006
- Archive Date
- 10/26/2006
- Description
- PR #10188231. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional information included in this notice and using the Simplified Acquisition procedures in FAR Part 13.5. This announcement constitutes the only solicitation; proposals are being requested but a separate written solicitation will not be issued. The Contracts Department at the Naval Air Warfare Center Weapons Division, Point Mugu, California, has a requirement to procure 5 each Folding Tables for an existing shelter designed by Gichner Shelter Systems. The folding tables have been specifically designed as an upgrade to the existing Tactical Electronic Reconnaissance Processing and Evaluation (TERPES) Shelter which is used for tactical fielding solutions for the Marine Corps' TERPES program. Specifications are as follows: 1. Two folding tables are to be mounted contiguously on the curbside of the TERPES shelter, providing a 20" x 84" overall working surface for Transportable Workstation laptop computers. Each table is designed to withstand a total abused load of 150 lbs with safety pin lock positions in both folded and unfolded positions; 2. The folding tables consist of Doublers, Table Tops, Support Brackets, Safety Brackets, and Hinge Table Support Mount, as described in the following: Two doublers, one each for the left and right folding tables, shall be mounted on the curbside of the TERPES shelter to provide secure anchoring to mount the folding tables to the shelter wall. Each double shall be 0.09" think aluminum alloy sheet, 6061-T4 per QQ-A-250/11 and AMS4026, and finished with a chemical conversion coating, primer, and polyurethane topcoat. Each is 22.00" tall x 43.88" wide and riveted to the shelter wall, where the top and bottom edges of the doublers are 30" and 8" off the shelter floor respectively, with a gap space of 0.06" between the doublers. The table top shall be made of plywood 0.75" thi ck, 20.00" wide, and 41.87" long with re-enforcement on all edges to the sum total thickness of 1.50". The outside corner of each table top shall be rounded (R3.00) for safety, resulting in a left-hand and right-hand version of the table top, and hence their non-interchangeability. Top surface and edges of the table tops shall be laminated with Formica Color No. 37886 IAW Fed-Std-595. Each table top is mounted to a doubler riveted to the shelter wall by a hinge support mount. When unfolded, it has additional support by two support brackets under the table. Two support brackets, one on each end of a table top shall provide added support when the table is unfolded. The brackets shall be 0.09" think aluminum alloy sheet, 6061-T4 per QQ-A-250/11 and heat treated to 6061-T6 after forming. It is finished with a chemical conversion coating, primer, and polyurethane topcoat. Bend and holes are added to the hinge as shown in the drawing 97012A1044. The folding tables are locked in the folded or unfolded positions by two sets of two safety brackets. Two 6061-T4 aluminum alloy L-extrusion bars are welded together to form the final product. It is finished with a chemical conversion coating, primer, and polyurethane topcoat. Detailed dimensions of the safety bracket are shown in drawing 97012A1043. Hinge Table Support Mount: The hinge table support mount is a piano type hinge modified from MS35827-8C. Each table top is mounted to the doubler and hence the shelter wall with a 40" long hinge table support mount. This hinge mount provides both support and folding function to the table top. Modifications of MS35827-3C and detailed dimensions of the hinge table support are shown in drawing 97012A1042. For technical questions contact Anh Tran 805-989-8762, or Steve Lalonde 805-989-9445. Drawings will be provided upon email request; telephone/fax requests will not be accepted. Offeror is responsible for completing and including with bid the following FAR fill-in clause: 52.212-3 Alt I Representations and Certificatio ns - Commercial Items. The following additional FAR clauses apply, but may not be limited to: 52.212-4, 52.212-5, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-50, 52.232-33, 52.233-3, 52.233-4, 52.242-15, 52.247-34, 52.252-1, 52.252-2, 52.252-6, 52.252-6, 252.204-7003, 252.204-7004 Alt A, 252.212-7001, 252.225-7000, 252.225-7001, 252.225-7002, 252.225-7036 Alt I, 252.232-7003, 252.232-7010, and 252.243-7001. Questions resulting from this synopsis/solicitation must be emailed and received not later than 5 days prior to closing date. Offers and the completed FAR clause must be emailed by closing date of this solicitation, to barbara.contreras@navy.mil. The closing date of this solicitation is 9/26/06. All responsible sources may submit an offer which will be considered by the agency. NAICS Code = 332312 Place of Performance = N/A Set Aside = Total Small Business
- Record
- SN01147235-W 20060920/060918221427 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |