SOLICITATION NOTICE
28 -- BLADE SET,FAN,AIRCR
- Notice Date
- 9/13/2006
- Notice Type
- Solicitation Notice
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; 3001 STAFF DR STE 2AG1 109B; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8104-06-R-0573
- Response Due
- 10/30/2006
- Archive Date
- 1/28/2007
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): 2840011966053PN, FA810406R0573, FD20300780311 NEW MANUFACTURED MATERIAL - Item: 0001 NSN: 2840011966053PN BLADE SET,FAN,AIRCR P/N: 305-433-401-0, Description: Fan Blade Set ~ each blade has a dovetail base, covered with copper-nickel-indium plasma wear coat and a tungsten carbide coat shrouded z-notch tip with knife edge seal teeth that engages in a disk rim recess. The function of the F108 fan blade set is to act as one of the 44 blades that provides the first stage compressed air to the 4 stage low pressure booster which feeds the nine stage high pressure compressor. F108 Fan Blade is to provide 80% engine total thrust and super changes the high pressure core. Approximately 23 inches long by 2 inches wide. Total Line Item Qty: Min 141 each BEQ 281 each Max 421 each Destn: FB2039, Tinker AFB, OK.,73145-9013. Delivery: 31 JAN 2007 Surplus requirement exists for New/Unused Surplus only. PR Number(s): 2840011966053PN, FA810406R0573, FD20300780311 NEW UNUSED SURPLUS - Item: 0002 NSN: 2840011966053PNPN BLADE SET,FAN,AIRCR P/N: 305-433-401-0, Description: Fan Blade Set ~ each blade has a dovetail base, covered with copper-nickel-indium plasma wear coat and a tungsten carbide coat shrouded z-notch tip with knife edge seal teeth that engages in a disk rim recess. The function of the F108 fan blade set is to act as one of the 44 blades that provides the first stage compressed air to the 4 stage low pressure booster which feeds the nine stage high pressure compressor. F108 Fan Blade is to provide 80% engine total thrust and super changes the high pressure core. Approximately 23 inches long by 2 inches wide. Total Line Item Qty: Min 141 each BEQ 281 each Max 421 each. Surplus material shall be new/unused material only. Acceptance inspection shall be conducted at contractor's facility only. New/unused Commercial off the shelf (COTS) surplus parts, component parts and/or assemblies shall have the original FAA Form 8130-3, Airworthness Approval Tag with appropriate documentation annoted by the OEM's manufacturing source. An incomplete, altered or incorrect FAA 8130-3, for that COTS part or assembly is unacceptable as an Airworthness Release Record. Surplus parts, component parts and/or assemblies must be a CFMI authorized/approved parts manufacturing vendor only. No commercialy repaired, reconditioned or modified surplus COTS material will be authorized and/or acceptable for use in military F108-CFM56-2B engines. Surplus COTS and FAA-PMA new/unused replacement parts, components parts and/or assemblies that were approved for production under these methods, FAA designess, DER, DOA, DAS, Type Certificate, Technical Standard Order Authorization and Etc, will not be authorized for use in Military F108 engines. Destn: FB2039, Tinker AFB,OK.,73145-9013. Delivery: 31 JAN 2007. The approximate issue date date for the RFP will be 28 Sep 06 and the response date will be 30 Oct 06. The anticipated award date will be 22 Nov 06. This is a sole source procurement to CFM International Inc. (58828) Electronic procedure will be used for this solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
- Record
- SN01142295-W 20060915/060913221215 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |