Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 24, 2006 FBO #1732
SOLICITATION NOTICE

66 -- Laser Scattering Device

Notice Date

8/22/2006
 

Notice Type

Solicitation Notice
 

NAICS

334516 — Analytical Laboratory Instrument Manufacturing
 

Contracting Office

Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD, 20899-1640
 

ZIP Code

20899-1640
 

Solicitation Number

SB1341-06-Q-0681
 

Response Due

9/1/2006
 

Archive Date

9/16/2006
 

Small Business Set-Aside

Total Small Business
 

Description

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-12. *** The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 with a small business size standard of 500 employees. This requirement is 100% set aside for small businesses. Only interested small businesses may submit a quote. In accordance with the Non-Manufacturer Rule, to qualify under a small business set-aside, the distributor and the manufacturer must qualify as a Small Business under the NAICS code identified above. ***The National Institute of Standards and Technology (NIST) has a requirement for one (1) each, Laser Scattering Device to be used in the Fire Research Division at NIST, Gaithersburg, MD. ***All interested Offerors shall provide a quote for the following line item(s): Line Item 0001 - The Contractor shall furnish one (1) each, Laser Scattering Device *** The system shall meet or exceed the following technical specifications: 1. In non flowing, static samples, be capable of measuring the size of particles in the range 0.6 nm ? 6 micrometers size in suspensions and emulsions of liquid monomers (e.g. epoxies and polyols) and/or solvents, with particle concentrations from 0.05 wt percent to 5 wt percent. 2. The sample holder should except cylindrical sample vials with a minimum volume of 2 ml and maximum of 20 ml. 3. Be capable of characterizing a minimum sample volume of 15 microliter. 4. Be capable to measuring particle size in a temperature range between 2 degrees C and 90 degrees C. 5. He-Ne laser with a minimum power of 4 mW. 6. Be capable of data transfer with the NIST ?pick and place? automated robot. 7. Have a sample chamber accessible to the robot. *** Installation/Training/Warranty 1. The contractor shall schedule and facilitate installation/set-up and one (1) training session for up to two (2) technicians at NIST. The training shall provide a thorough demonstration of all equipment functions, maintenance, data administration, and basic troubleshooting. The training may be completed at NIST immediately after installation/set-up and demonstration of performance specifications (as described below), but shall be completed no later than 30 days after delivery. (Note ? Vendor?s quotation shall include segregated pricing for the training. Depending on the type of Laser Scattering Device selected, NIST may forego the training session and would therefore not include in the price or scope of the purchase order.) 2. Quotation must include unlimited telephone/e-mail support, during the warranty period, for questions regarding operation, and a one-year warranty. This warranty must cover non-consumable parts and travel/labor on-site should this become necessary within the warranty period. *** *** Inspection and Acceptance Criteria 1. Visual-Physical check at NIST laboratory for adherence to design specifications. 2. Performance check at NIST laboratory for adherence to performance specifications. The tests will be performed as soon as the instrument is ready, as determined by the contractor, and may be witnessed by the contractor.*** **Delivery shall be FOB DESTINATION and be completed in accordance with the contractor?s commercial schedule. *** ***The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. The contractor shall deliver all line items to NIST, Building 301, Shipping and Receiving, Gaithersburg, MD 20899-0001. *** ****The Government will evaluate the quotations based on the following evaluation criteria: 1) Technical Capability factor "Meeting or Exceeding the Requirement," 2) Past Performance, and 3) Price. Technical Capability and Past Performance, when combined, are more important than Price. ***Award will be made on a best-value basis. Under the Technical Capabilities factor, strongest consideration will be given for a system with one or more of the following additional features or capabilities: 1. High power 50 mW 532 nm laser 2. Narrow band filter (to improve signal quality for fluorescent samples) ****Evaluation of Technical Capability shall be based on the information provided in the quotation. Quotations shall include the make and model of the products, manufacturer sales literature or other product literature, which CLEARLY DOCUMENTS that the offered product(s) meet or exceed the specifications stated above. ****Past Performance will be evaluated to determine the overall quality of the products and services, provided by the Contractor. Evaluation of Past Performance shall be based on the references provided IAW FAR 52.212-1(b)(10) and/or information from other sources, including NIST. Quoters shall provide a list of at least three (3) references to whom the same or similar products have been sold. The list of references shall include, at a minimum: the name of the reference contact person and the company or organization; the telephone number of the reference contact person; the contract or grant number; the amount of the contract and the address and the telephone number of the Contracting Officer, if applicable; and the date of delivery or the date services were completed. ***The following provisions and clauses apply to this acquisition: Provisions: 52.212-1, Instructions to Offerors-Commercial Items 52.212-3 Offeror Representations and Certifications-Commercial Items. ***Offerors shall complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. *** ***The following clauses apply to this acquisition: Clauses: 52.204-7 Central Contractor Registration 52.212-4 Contract Terms and Conditions?Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items including subparagraphs: (5) 52.219-6, Notice of Total Small Business Set-Aside (14) 52.222-3, Convict Labor (15) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (16) 52.222-21, Prohibition of Segregated Facilities (17) 52.222-26, Equal Opportunity (18) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (19) 52.222-36, Affirmative Action for Workers with Disabilities (20) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (21) 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (24) 52.225-3, Buy American Act--Free Trade Agreement--Israeli Trade Act and ALT I (26) 52.225-13, Restrictions on Certain Foreign Purchases (31) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. Department of Commerce Agency-Level Protest Procedures Level above the Contracting Officer is also incorporated. It can be downloaded at www.nist.gov/admin/od/contract/agency.htm. All FAR clauses may be viewed at http://acquisition.gov/comp/far/index.html. *** ***All vendors shall submit the following: 1) An original and one (1) copy of a quotation which addresses all Line Items; 2) Two (2) Originals of the Technical description and/or product literature; 3) Description of commercial warranty; and 4) One (1) copy of the most recent published price list. ***All quotes shall be received not later than 3:30 PM local time, on September 1, 2006 at the National Institute of Standards & Technology, Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD 20899-3571, Attn: Todd Hill. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 24-hour (excluding weekends and holidays) prior notice shall be made to the Contracts Office at 301-975-4959. NIST is not responsible for late delivery due to the added security measures. In addition, offerors/quoters who do not provide 24-hour notification in order to coordinate entrance to the NIST campus shall assume the risk of not being able to deliver offers/quotes on time. The Government is not responsible for the amount of time required to clear unannounced visitors, visitors without proper identification and without complete information that would allow delivery (i.e. point of contact, telephone POC, bldg., room number, etc.). If 24-hour notification was not provided, it is suggested your company representative or your courier service arrive at NIST at least 90 minutes prior to the closing time in order to process entry to the campus through the visitor center and complete delivery. Notice shall include the company name, name of the individual making the delivery, and the country of citizenship of the individual. For non-US citizens, the following additional information will be required: title, employer/sponsor, and address. Please ensure that the individual making the delivery brings photo identification, or they will be denied access to the facility. E-mailed quotes are acceptable. Faxed quotes will NOT be accepted. See Numbered Note 1. ***
 

Place of Performance

Address: NIST

Zip Code: 20899

Country: UNITED STATES
 

Record

SN01121756-W 20060824/060822220331 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |