SOLICITATION NOTICE
T -- What You Need to Know About Cancer
- Notice Date
- 6/22/2006
- Notice Type
- Solicitation Notice
- NAICS
- 323110
— Commercial Lithographic Printing
- Contracting Office
- Department of Health and Human Services, National Institutes of Health, National Cancer Institute, Office of Acquisitions, 6120 Executive Blvd. EPS Suite 600, Rockville, MD, 20852
- ZIP Code
- 20852
- Solicitation Number
- RFQ-NCI-60091-NG
- Response Due
- 7/24/2006
- Archive Date
- 8/8/2006
- Small Business Set-Aside
- Total Small Business
- Description
- The National Cancer Institute requires the following printing services and deliverables. This is a combined synopsis/solicitation for commercial items, prepared in accordance with format in FAR 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation and a separate written solicitation will not be issued. This solicitation: No. RFQ-NCI-60091-NG includes all applicable provisions and clauses in effect through FAR FAC 05-09 (May 2006) simplified procedures for commercial items. This requirement is set-aside for small business. The North American Industry Classification Code is 323110 and the business size standard is 500 employees. All prospective offerors should have a copy of the booklet Standard Technical Specifications for NCI Printing Requirements (hereafter referred to as NCI Standard Specifications) issued by DHHS/NIH/NCI. The information in this booklet provides supplemental information necessary for potential offerors to have a complete understanding of the specifications set forth below. Copies of the booklet may be requested from Malinda Holdcraft, at (301) 402-4509. REQUIREMENT: TITLE: What You Need to Know About Cancer PRODUCT: 68 text pages plus separate 4 page cover BASIS FOR AWARD: The actual award amount will be $100,000 for this contract. Our objective is to obtain the highest possible quantity, for this dollar amount. Your added rate per thousand overs will be used to either increase or decrease your firm?s bid price to reach this dollar amount. The failure to provide an added rate will render your firm?s proposal non-responsive. Award shall not be delayed pending the evaluation process. QUALITY: Level 2 printing and finishing attributes are required for this specification. Reference GPO Publication 310.1 for attribute requirements. Printing is the predominate production function and none shall be subcontracted. All contractors offering a bid shall have passed the NCI Requirements for New Bidders prior to consideration of their proposal for award. A minimum sixty calendar days are necessary for the evaluation processing to be completed. QUANTITY: 10,000 copies and the final films used in the production of printing. TRIM: 5-3/8 inch x 8-3/8 inch, saddle wire stitch binding on the 8-3/8? dimension. FURNISHED MATERIALS: A Mac compatible CD-Rom disk together with a set of color laser proofs as a guide to production. Quarkxpress, Illustrator and Photoshop applications are used for desktop publishing. 2 SETS OF PROOFS: Provide laminated halftone dot proofs, stripped to show the full press sheet imposition, including colorbar, showing guide, gripper and ruled-up for all bindery marks of each form, plus dylux proofs, with all elements in proper position, folded and trimmed to final size. All the laminated proofs shall match the required PMS colors exactly, or the contractor can, at their option, provide press proofs for evaluation. NCI shall keep one complete proof set. PAPER: Covers-80 lb. white #1 Patina matte finish cover, minimum brightness of 90. (Centura Dull, McCoy Silk, Mohawk or Signature True dull are acceptable) Text -70 lb. white #1 offset opaque text, target brightness of 90, (Hammermill, Simpson, Springhill, or an approved equal). Only those papers listed above as approved equals will be considered. See the 39th edition (2005-?06 issue) of the Competitive Grade Finder. Both the text and cover stocks, when required, must be the same brand name items, and all the leaves within each book must be matching American mill brand manufactured papers only, private label papers and or foreign manufactured papers shall not be acceptable. INKS: Four color process, PMS 280 (Blue) and Black Ink. Solid inks required, no builds allowed. Inks shall contain minimum percentages of vegetable oil in compliance with federal procurement mandates. BINDING: Saddle wire stitch twice through the spine, along the 8-3/8 inch dimension. Bleed trim on 3 sides to a final size after binding of 5-3/8 inch x 8-3/8 inch. No other alternate trim sizes shall be acceptable. Each signature must be a complete four page component, short trimmed or binding lip attachment methods shall not be acceptable. Steel rule die-strike the cover fold to prevent cracking, (a litho press or rotary stitcher score is not acceptable). Run the cover paper grain parallel to the spine. SEPARATIONS: None required. FORMAT: Covers 1-4, text 1-68. PRINTING: Print outside covers 1 and 4 in a solid and two flat tint areas bleeding all sides using PMS 280. Black overprint text and rules prints on both pages with a reversed to white headline on cover 1. Covers 2 prints with a 20 percent screen of PMS 280 plus, Black text, keylines and a rule. Cover 3 prints as black type matter only. Text pages 11, 13, 19 and 27 each contain one four color process illustration, together with type matter in Solid PMS 280 Blue and dense Black ink. Text pages 16, 21 and 31 each contain a line art illustration reproducing in solid black ink with text and rules plus a 20 percent screened PMS 280 background, from separate furnished reflective artwork. Text pages 9, 10, 12, 15-18, 23, 33 and 40 each print with a 20 percent screen of PMS 280 with black text, keylines and a rule. Text pages 3-20, 22-44, 62 and 63 each print a solid PMS 280 first character reversed box plus black ink type matter and rules. Text pages, 2 is blank, with the balance of the text prints in black ink from all line artwork. NOTE: Heavy ink coverage is required and the contractor must take any and all necessary precautions to prevent ghosting and lay a smooth uniform ink film. Text and cover signatures must be manufactured on a lithographic printing press capable of printing all the required colors with one pass through the press and the complete color bar as detailed on page 3 of these specifications. Do not assume that sheet-fed perfecting is acceptable to the government. An on-site inspection during the make ready will use the following as the standard for acceptance on perfecting. If the NCI representative is unable to determine by examination which side is first down, then perfecting is acceptable. Web fed printing techniques shall be on heat-set equipment only. Ghosting and in-line problems shall not be acceptable. COATING: Overall aqueous coat, satin finish, the outside covers 1 and 4 only. MARGINS: Bleeds, follow trim marks on furnished camera copy. DISPLAY EXAMINATIONS: Examination of the camera copy is an integral part of these specifications. No additional payment will be allowed due to the contractor?s failure to examine the copy and thoroughly understand the nature and extent of the work to be performed. PRESS INSPECTIONS: Press sheets shall be inspected at the contractor?s printing facility for quality conformance. Each press sheet form must contain one color bar, at least 3/16 inch in width, for each ink color placed parallel to the ink rollers. Color control bars (such as, BRUNNER, GATF or GRETAG) must contain star targets, trapping, tint and dot gain patches, process built grays, if applicable, and extend the full width of the press sheet. Ink densities shall be constant across the full width of the sheet with no deviations to exceed plus or minus one-half of one percent. Light and heavy inking is not allowed. The contractor shall provide the correct viewing conditions for all press sheet inspections including 5000 degree kelvin light sources housed in a completely enclosed neutral gray booth and functional densitometers. PREAWARD SURVEY: In order to determine the responsibility of the prime contractor, the government reserves the right to conduct a preaward survey, or to require samples to QATAP evaluate, or other evidence of technical, managerial, financial and similar abilities to perform, prior to the award of a contract. PACKING: Plastic strap in units of 20 copies only, shrink wraps or paper banding shall not be allowed. Turn the items if necessary, to form a neat stack. Pack in new 44 pound edge crush test corrugated boxes filled to the top with 160 copies each. The cartons shall be specifically manufactured to fit this product. The maximum weight shall not exceed 45 lbs. per carton. Products must lay flat, do not stand upright in cartons. No packaging deviations shall be allowed. Label or stencil on one of the carton ends. RETURN MATERIALS: Return all camera copy or furnished materials as received, plus two file copy printed samples. Create a digital deliverable (Macintosh compatible CD-Rom disk of the high-res. files in Acrobat PDF format) and furnish copies of all the signed receipts in one package to NCI at the office address listed above, see page 1 of these specifications. NEGATIVES: If digital direct-to-plate technologies were used, the contractor shall also be required to furnish films as a deliverable item upon request. Compose negatives as RRED final films in two page printer's spreads only, allowing a minimum of ? inch working margins on all sides, using .007 film, (.004 film is allowed if computer electronic files were provided by the NCI). Pin hole registration punching of the final films is required and composed, not stripped, registration marks on all sides. The contractor shall inventory all the final negatives within their facilities until called for return by the NCI. Ownership of these films shall remain the government?s property. Industry trade customs shall not apply to film, flats, proofs, or color Okays. Pack films to protect emulsion layers and furnish each film set with the associated top sheet containing wet ink density readings, or your press room Okays for future color match. Films shall be ready for subsequent reprints without additional effort beyond exposures. Label: 06-NCI-PC-094, composed negatives and oks for storage What You Need to Know About Cancer. SHIPPING: The advanced samples copies: must be received before any other location deliveries. 10 advanced samples copies to: NCI Printing, (301-402-2624) 6116 Executive Boulevard Room 3064, Rockville, MD 20852, Attn: Printing Officer. The advanced samples copies must be received before any other location deliveries. Ship15 file copies to: Library of Congress, Madison Bldg., (Exchange and Gift Division), Federal Documents Section, C Street, North East, (between 1st and N Streets), Washington, DC 20540. Ship 2 NCI file copies to: National Tech. Info Service, Office of Business Development, Attn: Sue Feindt, (703-605-6244) 5285 Port Royal Road, Springfield, VA 22151. Ship 2 (NCI) C and I copies to: NIH Printing, ATTN: Lisa Harper Building 31, Room B-4B-N-08 9000 Rockville Pike Bethesda, Maryland 20892 301-496-6781 Ship 10 client samples to: National Cancer Institute ATTN: Ms. Geri Piazza 6116 Executive Boulevard Room 3015 Rockville, Maryland 20852 (301-402-0555) Ship 5 depository copies to: the U.S. GPO, Stop: SSLA Depository Receiving Section, 44 H Street NW, loading dock Washington, DC 20401 Label cartons...item number 507-G-02. Ship 2 NCI file copies to: ATTN: Mr. Jan Ehrman at NIH 9000 Rockville Pike, Building 31, Room 5-B-52 Bethesda, Maryland 20892 301-496-4143 Call for delivery appointment prior to any bulk shipments: Ship balance of bulk copies to: Aspen Systems, ATN: Lou Young 1000 Haverhill Road Baltimore, Maryland 21229 410-644-7742 Proofs will be withheld 3 working days from the time they are received until they are returned. Label the proof package with the NCI PC number and product title. Return the materials in the proper order as originally provided by the government. Press Sheet Inspection requires 5 days notice. Notify the NCI at 301-402-2624 for inspection. General packaging information for bulk shipments delivered to the National Cancer Institute Shipments not conforming to these requirements SHALL be refused. The exact packaging for each order will be detailed within the printing contract from the government. The contractor shall initiate contact with our warehouse, if the inventory control number and bar code artwork are not furnished, prior to labeling any cartons or the press run. Typically, this number & bar code are also listed on the lower right hand position of the laser proofs. If the number is provided use it on the cartons. Receiving hours are 6:30 am-12:00 and 1-3:30 pm, Monday-Friday, except federal holidays. Call for delivery appointment prior to any bulk shipments: Ship the bulk quantity to Aspen Systems, Inc. 1000 Haverhill Road, Baltimore, Maryland 21229 to the attention of Ms. Lou Young, 410-644-7742 as stated above. Use 48 x 40, four way GPO Pallets only. Stencil each carton on 1 end, with the NCI PC Number, Title, Inventory Number and the Quantity per carton and per package. 06-NCI-PC-094 (20 per package / 160 per carton) What You need to Know About Cancer Inventory No. P-018. Cover the pallets with plastic stretch wrap after strap banding and corrugated edges. Band each pallet twice, in both directions, using plastic strapping over corrugated edge protectors only. The cartons shall only be new 44 pounds. Edge crush test or 275 pounds bursting strength and specifically made to contain this product. Affix packing delivery list to the last pallet loaded on the truck, facing the dock. All skids shall be four-sided entry and the weight must not exceed 2,000 pounds. Do not side load or double stack on the truck trailers. Stack skids, not to exceed 50 inches total, (from the floor to the top of the assembly.) SCHEDULE: Display of materials at NCI, OCC, Building 6116, Room 3064, Executive Boulevard, Rockville, MD 20852. Quotations are due July 24, 2006 at 1:00 pm. Award shall be made on or about July 25, 2006. Material pickup: July 26, 2006. 10,000 copies due at the NCI destinations as listed above August 23, 2006. Advanced sample copies must be received at the NCI Office of Cancer Communications prior to any bulk distributions. Balance of copies due at destination (Aspen Warehouse) September 6, 2006. Return of furnished materials and receipts September 6, 2006. NOTE: Please be aware that w/o the return of all the furnished materials, complete as specified within these printing specifications, payment will/can be withheld until all these materials are received. The package shall include copies of all shipment documents with signatures by the receiver and two sample file copies. PROVISIONS AND CLAUSES: The following FAR provisions and clauses apply to this acquisition: FAR 52.212-1, INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS FOR SIMPLIFIED ACQUISITION; FAR 52.212-3, OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL ITEMS-WITH DUNS NUMBER ADDENDUM, FAR 52.212-4, CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES, OR EXECUTIVE ORDERS-COMMERCIAL ITEMS-FOR SIMPLIFIED ACQUISITION. Far Clause 52.219-6, NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE. The following FAR clauses cited in paragraph (b) of the clause at FAR 52.212-5 are also applicable to this acquisition; FAR 52.222-26; EQUAL OPPORTUNITY; FAR 52.222.35, AFFIRMATIVE ACTION FOR DISABLED VETERANS AND VETERANS OF THE VIETNAM ERA; FAR 52.222-36, AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES; FAR 52.222-37, EMPLOYMENT REPORTS ON DISABLED VETERANS AND VETERANS OF VIETNAM ERA; FAR 52.225-3, BUY AMERICAN ACT SUPPLIES; AND 52.232-34, PAYMENT BY ELECTRONIC FUNDS TRANSFER-OTHER THAN CENTRAL CONTRACTING REGISTRATIONS. Full text copies of the representations and certifications for other cited provisions and clauses may be obtained on line at the NCI website at http://amb.nci.nih.gov or from Malinda Holdcraft, Contract Specialist, (301) 402-4509. OFFERS: Offers must be submitted on an SF-1449 with a completed 52.212-3 Offeror Representations and Certifications-Commercial Items-with Duns Number Addendum, signed by an authorized representative of the offeror or certification/validation of Central Contractor Registration (CCR) and Online Representations and Certifications Applications (ORCA). PLEASE NOTE: In order to receive an award, contractor must be registered and have valid certification in the Central Contractor Registration (CCR) (http://www.ccr.gov) and the Online Representations and Certifications Applications (ORCA) (http://orca.bpn.gov). Offers/Quotations must be received in this office by 1:00 PM on July 24, 2006. Please refer to the solicitation number RFQ-NCI-60091-NG.
- Place of Performance
- Address: Contractor Location
- Country: USA
- Country: USA
- Record
- SN01075398-W 20060624/060622220609 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |