SOURCES SOUGHT
J -- DRYDOCK REPAIRS TO 41' UTILITY BOATS (UTB)
- Notice Date
- 2/28/2006
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- DHS - Direct Reports, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- Reference-Number-DD41'UTILITYBOATS
- Response Due
- 3/8/2006
- Archive Date
- 4/30/2006
- Description
- The U.S. Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns or for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) for the Drydock and Repair of the 41 Foot Utility Boats (UTB). The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The 41 Foot Utility Boats are expected to be Geographically Restricted to a 140 nautical mile radius from Woods Hole, MA. The U.S. Coast Guard anticipates awarding a Requirements Type Contract. The requirements period of performance will be 12 months from the date of award and contain Three (3) 12 month option years to be exercised at the government?s discretion. All work will be performed at the contractor?s facility. The work items for the 41 Foot Utility Boats will include, but is not limited to: Welding repairs (aluminum), Remove, inspect and reinstall rub rail system, Renew rub rail section, Renew mounting stud and hardware, Inspect and repair cabin top, Skin repair, Crack repair, Replace damaged cores, Through bolted fasteners, Preserve cabin top, Preserve underwater body, Coating system visual inspection, Renew no-skid deck pads, Preserve freeboard, Routine drydocking, temporary logistics, and Perform UT shots. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. At the present time, this acquisition is expected to be issued as a Small Business set-aside. However, in accordance with FAR 19.1305, if your firm is HUBZone certified or 19.1404 if you firm is SDVOSB and intend to submit an offer on this acquisition, please respond by e-mail to mrrobinson@mlca.uscg.mil, or by fax (757) 628-4676. Questions may be referred to Mia Robinson at (757) 628-4654. If you intend to submit an offer on this acquisition, you must include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers, At least two references are requested, but more are desirable. Additionally, please include your capabilities in the following: (1) fiberglass repair (2) Aluminum welding (3) Facilities (availability of indoor painting, machine shop, and storage facility with a minimum of 600 cuft). Contractors are reminded that should this acquisition become a HUBZone set aside or SDVOSB Small Business, FAR 52.219-3, Notice of Total HUBZone Set-Aside or 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside, will apply, which requires that at least 51 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small business concerns. Your response is required by March 8, 2006. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone or Service-Disabled Veteran-owned Small Business set aside. A decision as to how this requirement will be pursued will be posted on the FedBizOps website at http://www.fbo.gov.
- Place of Performance
- Address: Contractor's Facility
- Country: US
- Country: US
- Record
- SN00995907-W 20060302/060228211732 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |