SOLICITATION NOTICE
66 -- omposite Fixturing and Assembly Table
- Notice Date
- 1/5/2006
- Notice Type
- Solicitation Notice
- Contracting Office
- US Army ARDEC, AMSTA-AR-PC, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-06-T-0540
- Response Due
- 1/20/2006
- Archive Date
- 2/19/2006
- Description
- The US Army TACOM-ARDEC, Picatinny Arsenal, NJ is seeking award for a Composite Fixturing and Assembly Table to provide fabrication of large composite wrapped components for a precision fixturing and assembly table needed for holding pieces at location while curing to a finished state. The table shall handle up to 2,000 lb load and overall size to handle a complete canon tube up to 24 ft in length. The table shall be at a comfortable height for working on components and the surface shall have details that would allow for bolting down various fixturing components such as vices. The contractor shall provide the specifications: 1) Table size minimum: 3 feet deep by 24 feet in length. This could be accomplished by joining no more than two 12 foot full table assemblies joined end to end. 2) Tabletop surface flatness shall be minimum .004 inches over 2 square feet. 3) Complete table assembly shall be capable of holding full canon tubes up to 2,000 lbs in weight. 4) The table supporting components of such size and weight while still holding the desired tolerances leads to a thick (min. 12 inch) table top incorporating a honeycomb type core. 5) Table top shall be a 410 stainless steel faceplate no less than .19 inches in thickness. 6) The entire top surface of the table shall have a grid of 1/4inch -20 tapped holes on 1 inch centers. 7) The table top(s) shall be supported by a set of eight rigid support legs giving the whole table a finished height of 30 inches from floor to table top surface. Intereded offerors shall supply the proposal to U.S. Army TACOM-ARDEC, ATTN: Margaret Rhinesmith, AMSRA-AQ-APE, B. 10, Picatinny Arsenal, NJ 07806-5000, via email only to mrhines@pica.army.mil. Any technical questions should be directed to the point of contact by email only. All responses must include company name, address, company pointof contact, phone number, fax number, email address, business size,taxpayer identification number, DUNS number and Cage Code. All prospective offerors must be registered with Central Contractor Registration at: http://www.ccr.dlis.dla.mil/scripts/index.html. See Numbered Note 13 and 25.
- Web Link
-
US ARMY TACOM-Picatinny Procurement Network
(http://procnet.pica.army.mil/dbi/download/GoGetSolicitation.cfm?SolNum=W15QKN-06-T-0540)
- Record
- SN00961724-W 20060107/060105212102 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |