MODIFICATION
66 -- Aerodynamic Water-Cooled Nozzle Throat Assemblies
- Notice Date
- 10/21/2005
- Notice Type
- Modification
- NAICS
- 332710
— Machine Shops
- Contracting Office
- 100 Kindel Drive Suite A332 Arnold AFB, TN
- ZIP Code
- 00000
- Solicitation Number
- FA9101-06-R-0002
- Response Due
- 12/9/2005
- Archive Date
- 6/9/2006
- Small Business Set-Aside
- N/A
- Description
- AEDC has the following requirement for two APTU Nozzles. The work will include fabrication and assembly of two aerodynamic nozzle throat sections to be used in an aerodynamic test facility. One nozzle throat is for Mach 5 test conditions and the other is for Mach 6. Each nozzle is water-cooled, multi-component assembly approximately 27? outside diameter and 46? in length. The internal throat contour is axisymmetric with an internal diameter that varies from 7? to 25? over the length of the assembly. The throat contour must be machined to tolerances of plus or minus .001?. The accuracy of machining must be verified at approximately 300 contour points in addition to normal dimensional verifications. Ability to machine and verify to these tolerances is a critical requirement. The nozzles are to be fabricated from copper beryllium and other metals. The internal water passages are approximately 0.812? in diameter of various lengths. Delivery of the Mach 5 nozzle is required within 6 months after contract award. The Mach 6 nozzle is required within 8 months after contract award. The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/jcp/ . The DD2345 may be submitted to Fax Number 931-454-7330 or email your certification number to eric.yatsko@arnold.af.mil. For more information on "Aerodynamic Water-Cooled Nozzle Throat Assemblies", please refer to: http://www.pixs.wpafb.af.mil/pixs_solicitation.asp?id=4131
- Web Link
-
Aerodynamic Water-Cooled Nozzle Throat Assemblies
(http://www.pixs.wpafb.af.mil/pixs_solicitation.asp?id=4131)
- Place of Performance
- Address: USA
- Zip Code: USA
- Country: USA
- Zip Code: USA
- Record
- SN00919270-W 20051023/051022080343 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |