Loren Data's FBO Daily™

Home Today's FBO Search Archives Numbered Notes CBD Archives Subscribe

34 -- vacuum furnace

Notice Date
Notice Type
Solicitation Notice
333994 — Industrial Process Furnace and Oven Manufacturing
Contracting Office
Department of the Navy, Naval Supply Systems Command, Fleet and Industrial Supply Center Jacksonville, 110 Yorktown Ave 3rd Floor, Code 200, Jacksonville, FL, 32212-0097
ZIP Code
Solicitation Number
Response Due
Archive Date
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation ; quotations are being requested and a separate written solicitation will not be issued. Solicitation number N68836-05-T-0104 applies and is issued as a Request for Quotation. This procurement is set aside for small business 02. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-26 and Defense Acquisition Circular 91-19. The North American Industry Classification System (NAICS) code is 333994 and the business size standard is 500 . Fleet Contracting Center, Naval Air Station Jacksonville Fl intends to purchase on a competive basis the following line items VACUUM FURNACE IAW THE FOLLOWING SPECS: Minimum Specification Requirements for Small Vacuum Furnace The below specifications are the details of the minimum requirements for vacuum furnace heat treatment. Presently the depot?s vacuum furnace is hard down for repair and structurally could fail at any time. The specifications below are similar to the existing vacuum furnace specifications, as we need similar capabilities to process multiple grade steel and tool steel parts. The new unit shall be comparable to the following specifications: General: Pressure: 2 bar Work zone: 12?W x 24?D x 12?H Heat Elements: Molybdenum or Graphite Insulated HOTZONE Max. Temp. 2400oF Min. 400Amps Furnace Pwr: 135KW/460V/170A/60Hz Control Pwr: 3.5KW/460V/7.6A/60Hz Auxiliary Pwr: 92.5KW/460V/117A/60Hz Phase: 3 Positive and Negative Quench capabilities Backfill Pressure: 15psig or 2 bar Max. Quench: 15psig or 2 bar Hearth support up to 1500lbs. Hearth removable Sight Port Energy efficient Nitrogen and Argon backfill gases New control panel, programmable controls, chart, over temperature control, gauge controller Control Thermocouple: Type S for overtemp. Work Thermocouple: Type K Test port installed for Temperature Surveys Capable to pump down to 0.1 micron Diffusion Pump capable to pump down to 0.001 microns Accessories to include: Load truck: up and down, in and out, guided rails Work Grid Door latch (can be added for safety) Memory Module for program backup Application: Hardening Solution Heat Treating (Anneal) Used for steel and some titanium parts Additional Info: Terms of Warranty Company responsible for full install, NAVAIR will support facilities (bolt to deck, power connections) needed. Installation included in price quote Energy Conservation Package (if applicable) 3 manuals 3 sets of technical drawings and schematics 1 day maintenance training Freight cost Service Contract to perform PM, routine and emergency service, if needed *Need Itemized Quote **Red line items are desired, but not necessary for the application Procedures: Vacuum furnace must conform to the following Aerospace Materials Specifications: o AMS 2769 ? Heat Treatment in a Vacuum o AMS 2759C Heat Treatment of Steel Parts- General Requirements o AMS 2759/1C Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Megapascals) o AMS 2759/2C Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 Mpa) and Higher o AMS 2759/3C Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts o AMS 2759/4B Heat Treatment Austenitic Corrosion-Resistant Steel Parts o AMS 2759/5C Heat Treatment Martensitic Corrosion Resistant Steel Parts o AMS 2759/6A Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts o ASTM A 681 Standard Specification for Tool Steel Alloy QTY OF 1 EA FOR DELIVERY TO RECIEVING OFFICER, BLDG 110 DOOR 16, NAVAL AIR STATION JACKSONVILLE, FL 32212 The following provisions and clauses apply: Provision 52.252-1 Solicitation Provisions Incorporated by Reference. This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. (End of Provision) Provision 52.212-1, Instructions to Offers--Commercial; 52.212-2 Evaluation-Commercial items, 52.212-3 offeror representations and certifications- commercial items. Clause 52.212-4, Addendum to FAR 52.212-4: Paragraph (o) Warranty- Add: ?additionally, the Government will accept the contractor?s commercial warranty.? Contract Terms and Conditions--Commercial Items; clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders--Commercial Items (to include: 52.222-21 Prohibition of segregated facilities, 52.222-26, Equal Opportunity; 52.222-35, Affirmative Action for Special Disabled and Vietnam Era Veterans; 52.222-36, Affirmative Action for Handicapped Workers; 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era); Clause 52.216-1 Type of Contract, Clause 52.216-18 Ordering,Clause 52.216-19 order limitations, Clause 52.216-20 Definite Quantity, 52.216-21 Requirements alternate 1 Clause 52.232-33, Mandatory information for electronic funds transfer payment; clause 52.219-6 Total small Business setaside, and The following DFARs clauses apply to this acquisition: 252.204-7004 Central Contractor Registration, 252.212-7001, Contract Terms and Conditions Required to Implement Statutes Applicable to Defense Acquisitions of Commercial Items (including 252.225-7001 Buy American Act and Balance of Payment Program). Registration in the Central Contractor Registration (CCR) Database is a requirement for award go to www.ccr.gov to register. The full text of the Federal Acquisition Regulation (FAR) can be accessed on the internet at www.arnet.gov/far. Parties responding to this solicitation may submit their offer in accordance with their standard commercial practices (e.g. on company letterhead, formal quote form, etc.) but must include the following information: 1) company?s complete mailing and remittance addresses, 2) discounts for prompt payment if applicable 3) cage code, 4) Dun & Bradstreet number, 5) Taxpayer ID number. Offerors shall include a completed copy of the provision at 52.212-3 , Offeror Representations and Certifications-Commercial Items with their offer. The Government intends to make a single award to the eligible, responsible offeror whose offer conforms to the solicitation, and is the most advantageous to the Government considering price and price-related factors. This solicitation will be evaluated on the following factors: Technical, and price. Quotations must be received no later than 4:00 P.M . Quotations must be in writing and may be faxed or mailed to the following. Attn Venita K Harmon, Fleet Contracting Center, FISC JAX BLDG, 110 Naval Station Jacksonville FL 32212. Fax 904-542-1111 Telephone 904-542-1229.
Place of Performance
Address: Fleet and Industrial Supply Center, Bldg 110/3, P.O. Box 97A, Naval Air Station, Jacksonville FL
Zip Code: 32212
SN00807140-W 20050515/050513212432 (fbodaily.com)
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2016, Loren Data Corp.