MODIFICATION
49 -- Air Motors for Pneumatic Tying Tools
- Notice Date
- 11/15/2004
- Notice Type
- Modification
- NAICS
- 333991
— Power-Driven Handtool Manufacturing
- Contracting Office
- US Army Engineer District, Vicksburg, ATTN: CEMVK-CT, 4155 Clay Street, Vicksburg, MS 39183-3435
- ZIP Code
- 39183-3435
- Solicitation Number
- W807PM-4252-9914
- Response Due
- 12/6/2004
- Archive Date
- 2/4/2005
- Small Business Set-Aside
- N/A
- Description
- USACE, Corps of Engineers Vicksburg District proposes to issue a sole source award to Ingersoll-Rand Company, 510 Hester Drive, White House, TN 37188-9255 for gear driven multi-van air motors with spline shaft instead of the standard keyed or square output shafts, Model No. 1801/VSM. No modification shall be done to the standard air motor as produced by the manufacturer except for the output shaft. The air motor fits inside a pneumatic tying tool designed for the Government for typing concrete mattresses together. The air motor must fit the base plate. The maximum diameter of the air motor shall not exceed 2.500 inches and the overall length shall n ot exceed 11.5 inches including the output shaft. The air motor cannot extend pass the base plate in any direction. In order for the tying tool to accept any motor larger than specified or any motor, which does not conform to the base, the tying tool itse lf will have to be modified. The Government will not accept anything, which requires the tying tool to be modified. The output shaft has a standard parallel side 6-spline shaft 1.375 inches long that extends from the mounting plate on the air motor. A bev el gear having a S.A.E. Standard Parallel-side with 6 spline, fitting a .75 inch nominal diameter Class B, will fit on the output shaft of this air motor. The minimum diameter of the output shaft shall be the root diameter of the spline, which is 0.630 inc hes and heat treated to a Rockwell of 40 to 44. The air motor shall have a minimum horsepower rating of 1.35 with a minimum stall torque of 65 foot-pounds and a minimum free speed of 370 r.p.m. This performance is base on operating air pressure of 90 psi. The maximum weight shall not exceed 6 pounds. This will be a non-reversible air motor rated at an air pressure of 90 psi. All bearings will either be roller or needle bearings including the bearings in the planetary gears. A firm-fixed price award will be made utilizing Simplified Acquisition Procedures. Any other responsible source able to provide the requirement is encouraged to respond to this announcement within 15 days after its publication. This is not a request for quotations and there is no soli citation available at this time. If you are interested in submitting a quote, call Sophia H. Clark at 601/631-5812. This is an unrestricted requirement.
- Place of Performance
- Address: US Army Engineer District, Vicksburg ATTN: CEMVK-CT, 4155 Clay Street Vicksburg MS
- Zip Code: 39183-3435
- Country: US
- Zip Code: 39183-3435
- Record
- SN00708388-W 20041117/041115211941 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |