MODIFICATION
54 -- Loading Dock
- Notice Date
- 8/30/2004
- Notice Type
- Modification
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Department of the Air Force, Air Combat Command, 355 CONS, 3180 S Craycroft Rd, Davis Monthan AFB, AZ, 85707-3522
- ZIP Code
- 85707-3522
- Solicitation Number
- FA4877-04-Q-0505
- Response Due
- 9/1/2004
- Archive Date
- 9/16/2004
- Point of Contact
- Romeo Reyes, Contract Specialist, Phone 520-228-2214, Fax 520-228-5284, - James Northup, Contracting Officer, Phone 520-228-2217, Fax 520-228-5284,
- E-Mail Address
-
romeo.reyes@dm.af.mil, JAMES.NORTHUP@DM.AF.MIL
- Small Business Set-Aside
- Total Small Business
- Description
- Response due date has been extended to 01 Sept 2004, 2PM Local Time Additional Questions and Answers of 30 Aug 04. Six (6) additional questions: 1. Can the individual platforms be slightly different size than 10'x20'? We propose for material handling & shipping considerations using 16 sections 8'x20' for the platform and 15 pieces 8'x20' for the ramp. Specified 10'x20' individual platforms exceed the crane capabilities. Also, the proposed size would remove the need for a permit in shipping, lowering the freight cost significantly. Answer: Sections can be any size as long as dock can hold the required weight, and meets all other specifications. 2. Can the platforms be welded on site or are removable fasteners required? Answer: Removable fasteners only, this gives us the ability to move at a future date. 3. We understand that there are 7 hinge plates 88" wide. What should the length be or what will the maximum height difference between the platform and the K-Loader? Answer:10 each hinged bridge plates 50" long X 24 wide". There is no maximum height difference with the k-loader. The k-loader bed is adjustable from 39" to 222". 4. A hinge ramp 88"x24" will weigh 456#. How do you anticipate repositioning the plate? Answer:Changed the dimensions of the bridge plates to 50" X 24". If you would like a picture of the bridge plate configuration please email/contract TSgt Romeo Reyes at romeo.reyes@dm.af.mil or 520-228-5484 5. Are we able to get a better copy of the existing ramp photograph? Answer:We do not have any pictures. 6. Is the platform necessary? Are you open to an adjustable height ramp which is more flexible, more portable and much less expensive? Answer:No. (I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (II) Solicitation F02601-04-Q-0505 is being issued as a request for quotes. (III) This solicitation incorporates clauses and provisions in effect through the Federal Acquisition Circular 2001-24. (IV) This requirement is being synopsized as a small business set-aside under NAICS Code 332999, small business size standard of 500 employees. (V) Please quote to provide: all management, supervision, labor, parts, tools, lodging, material, and equipment necessary to provide 1 EA-60' wide by 100' long ramped rolling stock dock, weight capacity 50,000 pounds. Dock will be fabricated out of metal and will consist of 30 sections which are 10' wide by 20' long, and will require assembly by receiving unit. The 100' long sides of the ramp will have a 9" high rub rail which will ensure that a vehicle cannot drift over the side by accident. The truck bed end of the ramp will have hinged bridge plates to span the gap between the ramp truckbed end and K-loader. The rolling stock dock inclined ramp will be 60' wide x 40' long and will start at a height of 0" and will incline up to 48". The level surface of the dock will be 60' wide x 60' long and will be at a level height of 48". The deck surface will be made of 1.5" tall x 3/16" thick bar grating which, on the deck, will be a smooth top to allow for moving around without eating the tires, and ramp incline will be serrated top bar grating which gives maximum traction. The loading dock must provide capability to load rolling stock, ie., items with wheels off the ground on to a K-loader; most rolling stock cannot be lifted with a forklift onto a K-loader. (VI) Description of Requirement: Submission of drawings and/or specifications of item offered may be required before award. (VII) Place of delivery: 355 LRS/LGRRT, 4500 S. Phoenix St, Davis-Monthan AFB, AZ 85707. F.O.B POINT IS DESTINATION. (VIII) Provision 52.212-1, Instructions to Offerors-Commercial applies to this acquisition. (IX) Provision 52-212-2, Evaluation-Commercial Items applies to this acquisition; quote shall be evaluated on price. (X) Offerors are required to submit a completed copy of FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (http://www.arnet.gov/far/loadmainre.html) with their offer. (XI) Clause 52.212-4, Contract Terms and Conditions-Commercial Items applies to this acquisition. (XII) Clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders-Commercial Items applies to this acquisition. (XIII) N/A. (XIV) N/A. (XV) N/A. (XVI) Completed quotes shall be due to the 355th Contracting Squadron, 3180 S. Craycroft Rd. Davis-Monthan AFB, AZ 85707, by 06 Aug 2004, 12 p.m. local time. Please include payment terms and delivery terms with proposals. (XVII) Point of Contact (POC) for additional information is TSgt Romeo Reyes (520) 228-5484 (romeo.reyes@dm.af.mil) or MSgt James Northup (520) 228-4180 (james.northup@dm.af.mil). Proposals can be email or faxed to POC at (520) 228-5448. NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (30-AUG-2004); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/ACC/355CONS/FA4877-04-Q-0505/listing.html)
- Place of Performance
- Address: 355 LRS/LGRRT 4500 S. Phoenix St Davis-Monthan AFB, AZ 85707
- Zip Code: 85707
- Country: USA
- Zip Code: 85707
- Record
- SN00660818-F 20040901/040831065548 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |