Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 14, 2004 FBO #0992
SOLICITATION NOTICE

J -- Maintenance and calibration services for two (2)Government owned Numerex Coordinate Measuring Machines.

Notice Date

4/19/2004
 

Notice Type

Solicitation Notice
 

NAICS

334513 — Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
 

Contracting Office

TACOM - Anniston, Directorate of Contracting, ATTN: AMSTA-AN-CT, Building 221, 7 Frankford Avenue, Anniston, AL 36201-4199
 

ZIP Code

36201-4199
 

Solicitation Number

W911KF-04-Q-0101
 

Response Due

5/4/2004
 

Archive Date

9/13/2004
 

Point of Contact

Ginger S.Homesley, 256-235-6614
 

E-Mail Address

TACOM - Anniston, Directorate of Contracting
(homesleyg@anad.army.mil)
 

Small Business Set-Aside

N/A
 

Description

The purpose of this specification is to provide on-site emergency repairs and calibration services for two (2) each Government owned Numerex Coordinate Measuring Machines (CMM), DCC Apollo Series, Model Numbers RS-70 and RS-30 located in Bldg 133, An niston Army Depot, Anniston, Alabama. Each CMM is equipped with a Hewlett-Packard 308 computer. Requirements shall consist of all materials and supplies necessary to provide on-site emergency repairs and calibration services for the CMM which includes la b or diagnostic and calibration equipment, special tools, documents, transportation, schematic, common tools of the trade, etc. Each CMM shall be calibrated twice a year at six-month intervals. Preventive maintenance checks will be in conjunction with ca libration services and shall consist of all things necessary to reduce equipment down time including inspecting for worn or damaged parts, cleaning, and adjustments when needed. Equipment operational checks/self-test procedures will be designed to verify that the equipment is 100% operational and ready for government use. All equipment used to calibrate the CMM shall be certified with standards traceable to the National Bureau of Standards (NBS). A Certificate of Compliance for each CMM must be issued to the Government upon completion of calibration services. The on-site emergency repairs for the CMM will be on a high priority basis. After notification that services are needed for the CMM, arrival time to the installation must be within forty-eight (48) hours. Only new OEM repair parts shall be used to repair the CMM. All replaced parts or components shall remain the property of the government. This solicitation is UNRESTRICTED. North American Industrial Classification System Code is 334513 and the s ize standard is 500 employees. This solicitation will be issued electronically in accordance with FAR 4.501, 5.102(a)(7) and 14.205-1(c); therefore, hardcopies will not be provided. Vendors wishing an electronic copy may down load a copy on or after the issue date by accessing the following address via the Internet: http://www.procnet.anad.army.mil (Doing Business with Us). Estimated issue date is 04 May 2004. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Be cause of this, the Government is under no obligation, and is in fact, unable to maintain a bidders mailing list. It is, therefore, incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments, w hich may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for bid opening/receipt of proposals may render the vendor bid or proposal non-responsive and result in the rejections of the same. All respon sible sources may submit a proposal, which shall be considered. NOTE: THIS NOTICE MAY HAVE POSTED ON WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (19-APR-2004). IT ACTUALLY APPEARED OR REAPPEARED ON THE FEDBIZOPPS SYSTEM ON 12-AUG-2004, BUT REAPPEARED IN THE FTP FEED FOR THIS POSTING DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
 

Web Link

Link to FedBizOpps document.
(http://www.eps.gov/spg/USA/USAMC/DAAE24/W911KF-04-Q-0101/listing.html)
 

Place of Performance

Address: TACOM - Anniston, Directorate of Contracting ATTN: AMSTA-AN-CT, Building 221, 7 Frankford Avenue Anniston AL

Zip Code: 36201-4199

Country: US
 

Record

SN00643118-F 20040814/040812215827 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |