SOLICITATION NOTICE
29 -- Repair, F110-GE-100 LPT Inner Seal
- Notice Date
- 7/28/2004
- Notice Type
- Solicitation Notice
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- FA8104-04-R-0303
- Response Due
- 9/13/2004
- Archive Date
- 9/28/2004
- Point of Contact
- Shanna Kilburn, Contract Negotiator, Phone 405 734-8095, Fax 405 739-5493,
- E-Mail Address
-
shanna.kilburn@tinker.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- REPAIR, F110 STAGE 2 LPT INNER SEAL. One-time, fixed-quantity contract. Item 0001: Input/Output: NSN: 2840-01-199-0377PR P/N: 9507M54G01 and/or 1359M39G01. Quantity: 1000 ea. Applicable to: F110 Engine. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: Not to exceed (NTE) 250 ea every 30 days after receipt of order (ARO) and receipt of repairable assets. Item Description: Stage 2 LPT inner nozzle seal is a segmented honeycomb assembly that has a metal backing. The backing branches out to provide anchoring points to attach the seal to the engine and an attaching point for the honeycomb material. Function is to prevent the airflow loss between the spacer seal and the stage 2 nozzle seal. The deal results in engine performance degradation. Dimension is approximately 1.50 inches overall width and 0.7 inches overall height. The backing material is 0.050 ? 0.060 thick. The part is built on a 24-degree arch and 10.105 centerline radius. Material consists of Hastelloy X. For additional information contact Shanna Kilburn/LPKPA/(405) 734-8095. Qualification requirements: Sources must be qualified prior to being considered for award. These qualification requirements apply to line item(s) 0001. Electronic procedures will be used for this solicitation through FedBizOps at http://www.eps.gov/. Approved Source(s) are Chromalloy ? San Diego, El Cajon CA 92020-3107, Praxair Surface Technologies, Inc, North Kansas City, MO 64116-4142, Tri-Remanufacturing Corp, Terre Haute, IN 47803-0000, Twigg Aerospace Components, Martinsville, IN 46151, Ferrotherm, Cleveland, OH 44125-1117, Tru-Circle Manufacturing, Wichita KS, 67201. This requirement will be 100% set-aside for small business concerns. All responsible sources solicited may submit a bid, proposal, or quotation that shall be considered. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Please contact: OC-ALC/BC, ATTN: Source Development Office, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009 in writing for further information concerning the source approval process. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for Written Proposal will be posted to FedBizOps. See Note (s) 1, 23, 26.
- Record
- SN00632090-W 20040730/040728212244 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |