SOLICITATION NOTICE
40 -- 8-STRAND NYLON PLAITED WHOI ROPE
- Notice Date
- 7/6/2004
- Notice Type
- Solicitation Notice
- NAICS
- 314991
— Rope, Cordage, and Twine Mills
- Contracting Office
- Department of Commerce, National Oceanic and Atmospheric Administration (NOAA), National Data Buoy Center, National Data Buoy Center Building 1100, Room 360F, Stennis Space Center, MS, 39529-6000
- ZIP Code
- 39529-6000
- Solicitation Number
- QA133004RQ0032
- Response Due
- 7/19/2004
- Archive Date
- 8/3/2004
- Point of Contact
- Dennis Morris, Contract Specialist, Phone 228-688-1706, Fax 228-688-3153, - Timothy Black, Contract Specialist, Phone 228-688-2382, Fax 228-688-3153,
- E-Mail Address
-
dennis.morris@noaa.gov, tim.black@noaa.gov
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This announcement is a Request for Quote (RFQ). The solicitation number is QA1330-04-RQ-0032 and incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2001-24. The National Data Buoy Center (NDBC) Stennis Space Center, MS 39529 has a requirement for the following rope: (1) 3/4 inch 8-strand nylon plaited Woods Hole Lay rope ? 22 reels @500m per reel; (2) 7/8 inch 8-strand nylon plaited Woods Hole Lay rope ? 2 reels @ 350m per reel; and (3) 1 inch 8-strand nylon plaited Woods Hole Lay rope ? 2 reels @275m per reel. FOB Destination Stennis Space Center, MS. Delivery shall be 60 days at receipt of order. The specifications of the rope are as follows: (1) 3/4 inch rope: The contractor shall furnish all personnel, materials, equipment, services, and facilities, to provide 3/4 inch diameter, 8-strand plaited nylon rope in accordance with the following specifications. 1. Type 66 Dupont grade 707 nylon fiber; 2. 8+ grams per denier; 3. Lay, Woods Hole Lay, torque balanced design; 4. Weight per 100 feet, not to exceed 13.5 lbs.; 5. Strand turn per foot of rope-12; 6. Picks/ft-9; 7. Elongation at breaking ? minimum 35 percent; 8. Breaking strength ? 15,000 lbs. Minimum; 9. Rope must be steam stabilized to force approximately 5 percent shrinkage; 10. Length-500 meters per reel (nominal); 11. Rope shall be furnished on non-returnable wooden reels, 30 inch x 23 inch x 12 inch; 12. Reel drive pinhole diameter shall be 1 inch and located 5 inches from center; 13. The reel head shall be 5/4 inch boards, two ply with wood laid perpendicular to each other and securely nailed. The nail heads shall be countersunk below the surface of the wood; 14. The headboards shall have a center hole of 3 inch diameter; 15. The barrel shall consist of 3/4 inch thick wood staves mortised into the reel head; 16. The reel shall be assembled with three 3/8 inch or 1/2 inch diameter steel bolts having cup washers on each end. (2) 7/8 inch rope: The contractor shall furnish all personnel, materials, equipment, services, and facilities, to provide 7/8? diameter, 8-strand plaited nylon rope in accordance with the following specifications. 1. Type 66 Dupont grade 707 nylon fiber; 2. 8+ grams per denier; 3. Lay, Woods Hole Lay, torque balanced design; 4. Weight per 100 feet, not to exceed 18.9 lbs.; 5. Strand turn per foot of rope-11; 6. Picks/ft-8; 7. Elongation at breaking ? minimum 35 percent; 8. Breaking strength ? 21,000 lbs. Minimum; 9. Rope must be steam stabilized to force approximately 5 percent shrinkage; 10. Length-350 meters per reel (nominal); 11. Rope shall be furnished on non-returnable wooden reels, 30 inch x 23 inch x 12 inch; 12. Reel drive pinhole diameter shall be 1 inch and located 5 inches from center; 13. The reel head shall be 5/4 inch boards, two ply with wood laid perpendicular to each other and securely nailed. The nail heads shall be countersunk below the surface of the wood; 14. The headboards shall have a center hole of 3 inch diameter; 15. The barrel shall consist of 3/4 inch thick wood staves mortised into the reel head; 16. The reel shall be assembled with three 3/8 inch or 1/2 inch diameter steel bolts having cup washers on each end. (3) 1 inch rope: The contractor shall furnish all personnel, materials, equipment, services, and facilities, to provide 1 inch diameter, 8 strand plaited nylon rope in accordance with the following specifications. 1. Type 66 Dupont grade 707 nylon fiber; 2. 8+ grams per denier; 3. Lay, Woods Hole Lay, torque balanced design; 4. Weight per 100 feet, not to exceed 23.9 lbs.; 5. Strand turn per foot of rope-10; 6. Picks/ft-7; 7. Elongation at breaking ? minimum 35 percent; 8. Breaking strength ? 25,000 lbs. Minimum; 9. Rope must be steam stabilized to force approximately 5 percent shrinkage; 10. Length-275 meters per reel (nominal); 11. Rope shall be furnished on non-returnable wooden reels, 30 inch x 23 inch x 12 inch; 12. Reel drive pinhole diameter shall be 1 inch and located 5 inches from center; 13. The reel head shall be 5/4 inch boards, two ply with wood laid perpendicular to each other and securely nailed. The nail heads shall be countersunk below the surface of the wood; 14. The headboards shall have a center hole of 3 inch diameter; 15. The barrel shall consist of 3/4 inch thick wood staves mortised into the reel head; 16. The reel shall be assembled with three 3/8 inch or 1/2 inch diameter steel bolts having cup washers on each end. The following FAR provisions or clauses apply to this acquisition: 52.212-1 Instructions to Offerors-Commercial; 52.212-2 Evaluation-Commercial Items; 52.212-3 Offeror Representations and Certifications-Commercial Items; 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Order-Commercial Items; 52.222-26 Equal Opportunity; 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; 52.222-36 Affirmative Action for Workers with Disabilities; 52.204-7 Central Contractor Registration; 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration; 52.247-21 Contractor Liability for Personal Injury and/or Property; and 52.225-1 Buy American Act-Supplies. Quotes may be faxed to 228-688-3153 or emailed to Dennis.Morris@noaa.gov, or mailed to: National Data Buoy Center, Attn: Dennis Morris, Building 1100 Room 360, Stennis Space Center, MS 39529. The NAICS Code is 314991 and the small business size standard is 500 employees. Buy American Act applies. This solicitation is 100 percent set aside for small business. See Numbered Note 1.
- Place of Performance
- Address: National Data Buoy Center, Building 1100 Room 360, Stennis Space Center, MS
- Zip Code: 39529
- Country: US
- Zip Code: 39529
- Record
- SN00615434-W 20040708/040706211633 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |