SOLICITATION NOTICE
68 -- Sodium Fluoride in accordance with AWWA Standard for Sodium Fluoride, AWWA B701-84
- Notice Date
- 5/19/2004
- Notice Type
- Solicitation Notice
- Contracting Office
- N00604 1942 Gaffney Street, Ste 100 Bldg. 475-2, Code 200 Pearl Harbor, HI
- ZIP Code
- 00000
- Solicitation Number
- N0060404TA665
- Point of Contact
- ELIAS STAMATIADES 808-473-7573
- Description
- The Fleet and Industrial Supply Center, Pearl Harbor, HI, intents to procure Sodium Fluoride for Navy Public Works Center (PWC Pearl). DESCRIPTION: Sodium Fluoride in accordance with AWWA Standard for Sodium Fluoride, AWWA B701-84. CHEMICAL REQUIREMENTS (Exception to AWWA B701-94): Sodium Chloride shall have a minimum of 98 percent (dry basis) sodium fluoride corresponding to approximately 44.35 percent fluoride ion. PHYSICAL PROPERTIES: White, odorless, dry form that does not react with air or moisture; PH, 1% solution: 6.4; Granular Grade, crystalline; Specific Gravity, 2.79; Density (lbs./cu. Ft.), 90; Formula Weight, 42; Solubility (grams./100 mil of water): (exception to AWWA), (a) at 10C (50) F 4.2, (b) at 37C (100F) 4.45, (c) at 65C (150F) 4.70, (d) at 93C (200F) 4.95. SCREEN ANALYSIS: 100 percent shall pass through U.S. Standard Sieve Series No. 20. At least 85 per cent shall be retained on U.S. Standard Sieve Series No. 100. Container package should be moisture-proof fiberboard keg, net weight of 50 pounds, to meet National Standard UN1G. IMPURITIES: Additional impurity limits are specified as provided by the provisions of paragraphs 2.3.4 of the of the AWWA Standard for Sodium Fluoride (AWWA B701-84). At no time shall the sodium fluoride deposit any unusual or water-insoluble coating on the chemical feed equipment. Detection shall be by visual means. PRE-AWARD TESTING: Offerors shall furnish a packaged sample of 50 pound (keg) sodium fluoride, according to the above description, for analysis by the Government at no additional cost. The sample and proposed product shall be made by the same manufacturer. NOTE: Material Safety Data Sheet (MSDS) shall be submitted with both proposal and sample. Samples will be retained by the Gover nment and shall not be considered as part of the quantities ordered under this contract (delivery location for sample kegs will be provided in the forthcoming solicitation). SOLICITATION: Request for Quotes No. N00604-04-T-A665 will be issued for this requirement on or about 24 May 2004 (closing on 04 June 2004 at 1500 hours, Hawaii Time). The resulting contract would be comprised of a base period of one (1) year plus four (4) annual option annual periods (Period of Performance for the base year begins on 01 October 2004). This requirement will be 100% Small Business Set-Aside (SIC: 2819, NAICS: 325188). For questions regarding this requirement, please contact Elias Stamatiades, Contract Specialist, at 808-473-7573 or by email at elias.l.stamatiades@navy.mil.
- Record
- SN00588601-W 20040521/040519212533 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |