MODIFICATION
66 -- Digital Vibration Control System (DVCS)
- Notice Date
- 5/10/2004
- Notice Type
- Modification
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- ACA, Yuma Proving Ground - DABK41, ATTN: SFCA-SR-YM, Directorate of Contracting, Buidling 2100, Ocotillo Street, Yuma, AZ 85365-9106
- ZIP Code
- 85365-9106
- Solicitation Number
- W9124R-04-T-0038
- Response Due
- 5/17/2004
- Archive Date
- 7/16/2004
- Point of Contact
- Michael McDaniel, 928-328-6356
- E-Mail Address
-
ACA, Yuma Proving Ground - DABK41
(Michael.McDaniel@yuma.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The following technical question was submitted. The following government response is also provided. QUESTON Your requirement states that you are requesting the DVCS to have 8 channels scaleable to 32 (within a chassis) with an option for an additiona l 8 channels (Option 9). How many of your DVCS systems (5 total) require the Time recording specified in the C.3.1.3 Data Recording Section. How many channels from each of those systems. We configure our Time Recording capabilities separately into a Data Reduction system which will increase recording performance, allow multiple time sessions per test, and record directly to the PC disk without the need for downloading it. The systems will work together as one (through status and COLA channels) and will giv e you the best performance. As such, we have many ways to deliver this. 1. We could match every DVCS with its own Data Reduction system (double the channels and higher cost) 2. We could deliver 2 Data Reduction systems (8 ch) to be used with any DVCS (mos t flexibility and the channels can be put into 1 frame for larger tests) 3. We could deliver 1 Data Reduction system (16 ch) to be used with any DVCS (covers high channel needs, but only 1 frame to work with 1 DVCS at a time). RESPONSE The Options 9, 8 cha nnel addition is an incremental upgrade from the base 8 channel system to the maximum of 32 channels. It is anticipated that a minimum of one DVCS will be equipped with 32 channels for multichannel data acquisition requirements. As indicated in paragraph C .3.1.3, Statement of Work the DVCS requires the capability to independently perform the time waveform recording and associated control. Thus, the option 1 above (with 8 channel recording) will meet the base statement of work requirement. Identification of the additional hardware cost is suggested to evaluate the proposal accurately. An alternate proposal may be submitted for evaluation, such as optional hardware for 8 channel time waveform recording with an incremental additional channel cost. This QUESTION and RESPONSE is also located at web site www.yuma.army.mil/contracting/rfp.html for review. NOTE: THIS NOTICE WAS NOT POSTED TO WWW.FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (10-MAY-2004); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USA/DABK/DABK41/W9124R-04-T-0038/listing.html)
- Place of Performance
- Address: ACA, Yuma Proving Ground - DABK41 ATTN: SFCA-SR-YM, Directorate of Contracting, Buidling 2100, Ocotillo Street Yuma AZ
- Zip Code: 85365-9106
- Country: US
- Zip Code: 85365-9106
- Record
- SN00583486-F 20040512/040510213635 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |