MODIFICATION
34 -- CNC GRINDER
- Notice Date
- 3/29/2004
- Notice Type
- Modification
- NAICS
- 333512
— Machine Tool (Metal Cutting Types) Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Hill AFB OO-ALC, OO-ALC/PKXD 6038 Aspen Ave (Bldg 1289), Hill AFB, UT, 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8201-04-T-0037
- Response Due
- 4/12/2004
- Archive Date
- 6/1/2004
- Point of Contact
- Melaine Thomas, Contracting Officer, Phone 801-586-6636, Fax 801-777-6528,
- E-Mail Address
-
melaine.thomas@hill.af.mil
- Description
- The purpose of this amendment is to incorporate the following synopsis: Question and Answers: IS THE REQUEST FOR THE S-40 TYPE OR THE S-31 TYPE MACHINE? THERE IS A WORLD OF DIFFERENCE. A. THE SWINGS ARE DIFFERENT B. THE BED LENGTH IS DIFFERENT. RESPONSE: BOTH PURCHASE SPECS NEED TO BE SOLICITED. ONE IS FOR A S31 TYPE MACHINE AND THE OTHER IS FOR A S40 TYPE MACHINE. 2. WHAT MACHINE IS TO BE REMOVED AND HOW FAR WILL IT HAVE TO BE TRUCKED? ARE THERE ANY OBSTRUCTIONS IN THE BUILDING? RESPONSE: THE CONTRACTOR SHALL BE REQUIRED TO REMOVE THE OLD MACHINE A WEEK PRIOR TO ARRIVAL OF THE NEW MACHINE, CLEAN, COSMOLINE, PALLETIZE, COVER WITH EIGHT MIL VISQUEEN OR OTHER COVERING SUITABLE FOR OUTSIDE STORAGE AND MOVE IT TO A LOCATION OUTSIDE OF THE BUILDING AS DESIGNATED BY THE MAN PROJECT MANAGER. THIS WILL NO MORE THAN 100 YARDS FROM THE LOCATION OF THE OLD MACHINE TO A LOCATION OUTSIDE OF THE BUILDING. THERE SHOULD NOT BE ANY OBSTRUCTIONS OTHER THAN THE MACHINE THAT IS BEING MOVED TO GET IT OUT OF THE BUILDING. HOW FAR AWAY FROM THE MACHINE SITE IS THE ELECTRICAL BUSS. CAN YOU PROVIDE DRAWINGS OF THE INSTALLATION SITE? RESPONSE: DRAWING IS ATTACHED HOPE IT MAKES IT THROUGH. PM?S 6937 AND 9607 WILL BE MOVED OUT AND THE NEW MACHINES WOULD BE HOOKED UP IN THIS LOCATION. WE REQUEST AN EXTENSION TIME OF 2-3 WEEKS TO SUBMIT A QUALIFIED PROPOSAL. RESPONSE: EXTENSION WILL BE GRANTED UNTIL APRIL 12, 2004 ONLY. IS OTHER UTILITIES IN THE AREA OF THE INSTALLATION SITE? AIR, WATER, DRAIN? WHO IS TO INSTALL THESE UTILITIES? RESPONSE: ALL OF THESE ARE ALREADY PRESENT WITH THE OLD MACHINE THEY WOULD JUST NEED TO BE HOOKED UP BY THE CONTRACTOR. IS THE GRANITAN S103 BASE A REQUIRED MATERIAL OR IS CAST IRON PERMISSIBLE ? WE CAN MAINTAIN THE SAME ACCURACY, BUT WITHOUT THE GRANITAN S103. RESPONSE: PARA. 9.0 PROPOSALS SHALL INCLUDE A RESPONSE TO EACH NUMBERED PARAGRAPH OF THIS PURCHASE SPECIFICATION INDICATING COMPLIANCE OR NON-COMPLIANCE WITH THE PARAGRAPH?S PARTICULAR REQUIREMENTS. EACH PARAGRAPH SHALL BE NUMBERED USING THE PURCHASE SPECIFICATION PARAGRAPH NUMBERS. RESPONSE TO EACH PARAGRAPH SHALL STATE ?EXCEEDS REQUIREMENTS?, ?WILL COMPLY?, OR ?EXCEPTION TAKEN?. WHERE THE PROPOSAL EXCEEDS REQUIREMENTS OR EXCEPTIONS ARE TAKEN, BID SUBMITTALS SHALL PROVIDE SPECIFIC INFORMATION SO THE IMPACT OF THE OVER-COMPLIANCE OR EXCEPTION CAN BE EVALUATED. Anticipated award date: 31 May 2004. Electronic procedures will be used for this solicitation.
- Record
- SN00555957-W 20040331/040329212009 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |