MODIFICATION
66 -- Precision Air Data Standard (PADS)
- Notice Date
- 3/9/2004
- Notice Type
- Modification
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFMETCAL, 813 Irving Wick Dr. W., Heath, OH, 43056-6116
- ZIP Code
- 43056-6116
- Solicitation Number
- FY2333-04-Q-0023
- Response Due
- 4/15/2004
- Archive Date
- 10/30/2004
- Point of Contact
- Glenna Pound, Contracting Officer (Location Admin), Phone 740-788-5043, Fax 740-788-5157,
- E-Mail Address
-
glenna.pound@afmetcal.af.mil
- Description
- The purchase description has been posted at this site. The solicitation will be posted at a later date. A best value basic source selection procedure will be used. Past performance information will be required. This requirement is for the purchase of Precision Air Data Standard (PADS). PADS are intended to calibrate high performance air data test sets (ADTS) and other devices in the air data range. This item fills requirements currently addressed by mercury manometers and/or piston gauges. The requirements of the PADS are based on maintaining the manufacturer's specified ADTS measurement uncertainty with automated operation. To meet these objectives, the system does not require facilities beyond the conditions found in a conventional Precision Measurement Equipment Laboratory (PMEL) and its operation is fully automated, to the extent supported by the test instrument (TI). The PADS is an integrated, bench mounted calibration system covering the range of 0.3 to 110 in Hg with both absolute and gauge mode operation. Operation is fully automated, including setting individual on demand pressure points as well as multi-point calibration sequences and data acquisition and remote control of a capable TI (i.e. TI has an RS232 or IEEE-488 interface and command structure). The PADS operator interface is through a dedicated system controller with flat screen display, keyboard and pointing device. AFMETCAL Det1 intends to award a commercial order utilizing best value basic source selection and simplified acquisition procedures under FAR part 12 and 13. The basic order quantity will be for 1 each, additional data, and a 5-year extended warranty will be required. An FY-05 option for an additional quantity of 0-4 each, and an FY-06 option for 0-4 each will also be included. Unit test will be required. Units will be shipped to PMEL locations. Option quantities will be tested at the PMELS. Delivery shall be FOB destination. The solicitation is anticipated to be issued approximately 24 Feb 2004, with a due date of 24 Mar 2004. The solicitation package including purchase description will be posted at this site. A complete technical proposal will be required. To be eligible for award, offerors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and technical requirements, in addition to those identified as factors or subfactors. Fax and email responses are acceptable with a follow up original signature page by mail. Responses should be directed to Glenna Pound, Contracting Officer, at AFMETCAL Det1/MLK, 813 Irving Wick Dr. W., Bldg 2, Heath, OH 43056-6116. FAX 740-788-5157. glenna.pound@afmetcal.af.mil NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS.GOV ON THE DATE INDICATED IN THE NOTICE ITSELF (09-MAR-2004). IT ACTUALLY APPEARED OR REAPPEARED ON THE FEDBIZOPPS SYSTEM ON 10-MAR-2004. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Record
- SN00541159-W 20040312/040310222313 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |