SOLICITATION NOTICE
45 -- 45-Items to replace salt and fresh water pipes in dry dock for Naval Station, San Diego, California
- Notice Date
- 3/4/2004
- Notice Type
- Solicitation Notice
- Contracting Office
- N00244 Naval Base 937 North Harbor Drive San Diego, CA
- ZIP Code
- 00000
- Solicitation Number
- N63387RC00125
- Response Due
- 3/10/2004
- Archive Date
- 4/9/2004
- Point of Contact
- Brian O'Donnell 619-532-3445 Brian O'Donnell, Contract Specialist, Phone: 619-532-3445
- E-Mail Address
-
Email your questions to Clcik here to contact the Contract Specialist
(brian.odonnell@navy.mil)
- Description
- This is a combined synopsis/solicitation for a commercial item prepared in accordance with the Federal Acquisition Regulation (FAR) Part 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a separate written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 20. This Procurement is issued as a an unrestricted procurement. The agency need is to replace salt and fresh water pipes in dry dock for Naval Station, San Diego, California with the following items (CLINs): Note: Piping is to meet or exceed AWWA/NSF requirements. All gate valves to be non-rising stem composite type disc. CLIN 0001 Spool Ductile Iron 10? x 234? Victaulic x Victaulic grooved with 3 M Epoxy coat ing inside and out; Qty: 93 EA CLIN 0002: 10? Gate valve, flanged, Qty: 1 EA CLIN 0003: 10? 45 degree elbow w/ 3M Epoxy coating inside and out; Qty: 2 EA CLIN 0004: 10? 90 degree elbow w/ 3M Epoxy coating inside and out; Qty: 6 EA CLIN 0005: 10? x 10? x 6? Tee 10? w/ 3M Epoxy coating inside and out; Qty: 6 EA CLIN 0006: 10? x 10? x 4? Tee w/ 3M Epoxy coating inside and out; Qty: 4 EA CLIN 0007: 6? Flanged gate valves; Qty: 6 EA CLIN 0008: 4? Flanged gate valves; Qty: 4 EA CLIN 0009 6? Victaulic Grooved 45 Degree Elbow with 3M Epoxy coating inside and out; Qty: 6 EA CLIN 0010: 4? Victaulic Grooved 45 Degree Elbow with 3M Epoxy coating inside and out; Qty: 4 EA CLIN 0011: 10? Victaulic Adpater Flange with 3M Epoxy coating inside and out; Qty: 3 EA CLIN 0012: 10? Ductile Iron Blind Flange with Floor Brace with 3M Epoxy coating inside and out; Qty: 1 EA CLIN 0013: 4? V ictaulic Couplings with 3M Epoxy Coating; Qty: 24 EA CLIN 0014: 6? Victaulic Couplings with 3M Epoxy Coating; Qty: 36 EA CLIN 0015: 10? Victaulic Couplings with 3M Epoxy Coating; Qty: 105 EA CLIN 0016: Spool Ductile Iron 6? x 240? With 3M Epoxy Coating inside and out; Qty: 5 EA CLIN 0017: Spool Ductile Iron 4? x 240? with 3M Epoxy Coating inside and out; Qty: 4 EA CLIN 0018: 6? x 4? Flanged reducers Ductile Iron with 3M Epoxy Coating inside and out; Qty: 6 EA CLIN 0019: 4? Flanged Straight Wyes Ductile Iron with 3M Epxoy coating inside and out; Qty: 6 EA CLIN 0020: 6? Victaulic Flange Adapters; QTY: 6 EA CLIN 0021: 4? Vicatulic Flange Adapters; Qty: 4 EA CLIN 0022: 4? x 2 ?? reducing Flange (pipe threaded) with 3M Epoxy Coating; Qty: 16 EA CLIN 0023: 2 ? Ball Valves; Qty: 16 EA CLIN 0024: 2 ?? National Pipe Thread to Fire Hose Adapters; Qty: 16 EA CLIN 0025: Hilti T E-76 ATC including: Tool, Kitbox, grease, manual with 2 Year Guarantee; Qty: 1 EA CLIN 0026: Hilti KBII 5/8 x 3 ? (316 SS-100/box); Qty: 5 Boxes CLIN 0027: Hilti TE-Y 5/8 x 13; Qty: 12 EA CLIN 0028: Hilti Blow out Bulb; Qty: 1 EA CLIN 0029: Spool Ductile Iron 8? x 234? Victaulic and Victaulic Grooved, 3M Epoxy in and out; Qty: 90 EA CLIN 0030: 8? Vicatulic Elbow 90 Degree, with 3M Green Epoxy in and out; Qty: 5 EA CLIN 0031: 8? Victaulic coupling, with 3M Green Epoxy in and out; Qty: 103 EA CLIN 0032: 8? Victaulic Adapter Flange, with 3M Green Epoxy in and out; Qty: 16 EA CLIN 0033: 8? Gate Valves Flanged (composite disc type); Qty: 6 EA CLIN 0034: 12? x 8? Victaulic Eccentric Reducer; Qty: 1 EA CLIN 0035: 12? x 8? Victaulic 90 Degree Reducing Elbow; Qty: 1 EA CLIN 0036: 8? Victaulic 90 Degree Side Outlet Elbow; Qty: 1 EA CLIN 0037: 8? x 8? x 8? Victaulic Tee; Qty: 1 EA CLIN 0038: Tapping Saddles for 2? Connections; QTY; 7 EA CLIN 0039: 12? Victaulic 12 Hole 250 PSI Flanges; QTY: 2 EA CLIN 0040: Spool Ductile Iron 8? x 234? Flanged and Victaulic Grooved, 3M Epoxy in and out; QTY: 2 EA CLIN 0041: Victaulic Hole Cutting Tool HCT 908: QTY: 1 EA CLIN 0042: Victaulic VG412 Orbital machine Tool: QTY: 1 EA Bolts and nuts to be included. The requirement is for a firm-fixed price type contract with 42 CLINs. Contractor is to provide unit prices and also total their price. Contractor is required to provide a technical plan explaining the technical specifications and also a statement on its delivery schedule. In accordance with 52.211-8 Time of Delivery, all services must be performed in accordance with the schedule?no deviations are allowed. All prospective offerors are cautioned that in the event the Government is unable to determine price r easonableness based on the offers received and market analysis, the Government will not issue a contract. This decision is solely the decision and right of the Government. All efforts performed and all cost expended by prospective offerors in providing information requested by the solicitation (including potential site visits, if requested) are not subject to reimbursement by the Government. The following provisions apply: FAR 52.212-1, Instructions to Offerors Commercial Items, Addendum to FAR 52.212-1, Paragraph (b) (5) Offers shall provide an express warranty which at a minimum shall be the same warranty terms, including offers of extended warranties, offered to the general public. Express warranties shall be included in the contract; 52.212-5 Facsimile Proposals; Offerors are required to complete and include a copy of the following provisions with their proposals: FAR 52 .212-3, Offeror Representation and Certifications Commercial Items. DFARS clauses 252.212-7000, Offeror Representations and Certifications-Commercial Items and addendum clause DFARS clause 252.225-7035, Buy-American Act-North American Free Trade Agreement Implementation Act-Balance of Payment Program Certificate; Clause FAR 52.212-4 Contract Terms and Conditions Commercial Items, applies as well as the following addendum clauses; FAR 52.243-1 Changes?Fixed Price; DFAR 252.243-7001 Pricing of Contract Modifications. The clause at 52.212-5 Contract Terms and Conditions Required To Implement Statues or Executive Orders Commercial Item applies with the following applicable clauses for paragraph (b): FAR 52.222-26 Equal Opportunity; FAR 52.222-35 Affirmative Action for Special Disabled and Vietnam Era Veterans, FAR 52.222-36 Affirmative Action for Handicapped Workers, FAR 52.222-37 Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era, DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items, applies with the following clauses applicable for paragraph (b): DFARS 252.225-7012, Preference for Certain Domestic Commodities; and DFARS 252.225-70001 Buy American Act and Balance of Payment Program. 52.244-6 Subcontracts for Commercial Items. DFAR 252.204-7004 Required Central Contractor Registration, applies to all solicitations issued on or after 6/1/98; Lack of registration in the CCR database will make an offeror/quoter ineligible for award. Please ensure compliance with this regulation when submitting your quote. Call 1-888-227-2423 or on the Internet at http://ccr.edi.disa.mil for more information. Please ensure compliance with this regulation when submitting your proposal: 52.247-35 F.O.B Destination, Within Consignee?s Premises. The Government intends to make a single award to the responsible Offeror whose offer is the most advantageous to the Government considering price and price related factors. The Government intends to award the contract to the eligible, low-priced, responsible offeror. Provision 52.212-2 Evaluation Commercial Items applies with paragraph (a) completed as follows: Award will be made to the Offeror that meets the solicitation?s minimum criteria for technical acceptability at the lowest price. To be determined technically acceptable the Offeror must furnish product literature that demonstrates that the offeror can meet all requirements stated in the above purchase descriptions. All responsible Offerors are to submit current pricing, delivery time, payment terms, cage code, Dunn and Bradstreet number, Tax Identification Number and all applicable specifications regarding this solicitation. Also required are copies of applicable commercially published price lists pertaining to your company?s services that meet the specifications, along with applicable government discounts. Initial pricing (quotes) and any technical information must be received no later than 3:00 PST, 10 March 2004 and will be accepted via FAX (619)-532-1088, Attn: Brian O?Donnell (619.532.3445) or e-mail brian.odonnell@navy.mil). Quotes submitted as an attachment to an email should be sent in Word Version 6.0 or higher. Do not mail. Clause information can be downloaded from the internet from the following addresses; http://www.arnet.gov/far/ or http://www.acq-ref.navy.mil/turbo/arp51.htm/
- Web Link
-
Click here to learn more about FISC San Diego
(http://www.sd.fisc.navy.mil)
- Record
- SN00536912-W 20040306/040304223529 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |