SOURCES SOUGHT
38 -- Market Survey For Construction Materials
- Notice Date
- 11/17/2003
- Notice Type
- Sources Sought
- Contracting Office
- 1551 Hillshire Drive, Suite A, Las Vegas, NV; P.O. Box 364629, M/S 523 North Las Vegas, NV 89036-8629
- ZIP Code
- 89036-8629
- Solicitation Number
- DE-RP28-04RW12246
- Response Due
- 12/17/2003
- Point of Contact
- Wayne B. Miller, Contracting Officer, Wayne B. Miller, wayne_miller@ymp.gov;Spencer Peterson, Contract Specialist, 702-794-5521, spencer_peterson@ymp.gov
- E-Mail Address
-
Email your questions to Spencer Peterson, Contract Specialist
(spencer_peterson@ymp.gov)
- Description
- 1. SUBJECT: Market Survey For Construction Materials 2. DESCRIPTION: This is a market survey to identify potential offerors capable of providing various construction materials to the Yucca Mountain site in Nye County, Nevada. The response to this market survey will assist DOE in the development of an acquisition strategy. DOE is contemplating procuring about 900,000 tons of sand and aggregate (5 separate varieties); and 3 million cubic yards of fill (2 separate varieties). Although a more specific delivery schedule will be developed, it is anticipated that these materials will be needed from 2007 through 2012. The sand and aggregate varieties comprise: concrete coarse and fine aggregates in accordance with specification ASTM C33-02a; shotcrete aggregate in accordance with ASTM C 1436; yard surfacing aggregate with a nominal dimension of 1.25 inch; secondary road surface aggregate based on sieve analysis information from the U.S. Department of Transportation Gravel Roads Maintenance and Design Manual (e.g., 100 percent gravel must pass ? inch sieve size); and soil cement aggregate in accordance with Table 2.0 of the AASHTO system of soil classification (within STM D 3282, only materials A-1a, A-1b, A-2, A-3 or A-4 will be required). The fill varieties comprise: select fill with a gradation tested in accordance with ASTM D422 and D1140, and a plasticity index test in accordance with ASTM D4318 and not to exceed 15; and, select backfill with a gradation tested in accordance with ASTM D422 and D1140, except no more than 30 percent shall be retained on the ? inched sieve, and a plasticity index tested in accordance with ASTM D4318 and not to exceed 15. 3. MARKET SURVEY QUESTIONS: Interested firms are asked to submit information that (1) identifies the company (business name, business size (large/small/8a), point of contact, address and telephone number), (2) describes the facilities (or planned facilities) and capabilities to provide the requested materials, (3) generally describes any delivery arrangements and/or new facilities that the company contemplates, (4) identifies the approximate date at which the company would commence activities to meet the DOE schedule, and (5) describes whether the service would be subject to jurisdiction by state and/or federal agencies. 4. SUBMISSION PROCEDURES: Letters of interest, responses to questions and any additional questions or comments will be accepted via the IIPS only. No e-mails, Faxes will be accepted. Please try and limit your responses to 5 or 6 pages. POC: Spencer Peterson Phone: (702) 794-5521 5. DISCLAIMER: This is not a solicitation for proposals, however, this announcement is preliminary to an anticipated call for proposals. The requested information is for planning purposes only and does not constitute a commitment, implied or otherwise, that a procurement action will be issued nor will the government pay for the information solicited.
- Web Link
-
Click here for further details regarding this notice.
(https://e-center.doe.gov/iips/busopor.nsf/UNID/CDCEB4159BBFC11E85256DE10055E4A4?OpenDocument)
- Record
- SN00471211-W 20031119/031117211837 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |