SOLICITATION NOTICE
J -- Modification and Renewal of after galley on USNS MERCY (T-AH)
- Notice Date
- 10/22/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Military Sealift Command, Military Sealift Command Pacific, 140 Sylvester Road Naval Base Base Point Loma- Bldg 139 3rd Floor, San Diego, CA, 92106-3521
- ZIP Code
- 92106-3521
- Solicitation Number
- N62383-04-T-4000
- Response Due
- 10/30/2003
- Archive Date
- 11/5/2003
- Point of Contact
- Ernst Buijten, Contract Specialist, Phone 619-553-7710, Fax 619-553-7774, - Marie Garrett, Contract Specialist, Phone 619-553-9898, Fax 619-553-7695,
- E-Mail Address
-
ernst.buijten@navy.mil, marie.garrett@navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- The Military Sealift Command Pacific is soliciting proposals for the modification and or renewal of the USNS MERCY After Galley. Following is the Statement of Work: Provide services of a Qualified Marine Contractor to perform the following in the modification / renewal of the after Galley , 01-100-0 : a)Provide installation sketches to ABS for approval, prior to commencement of work, and submit as built drawings upon completion of work. Any interferences are to be temporarily removed and reinstalled or designed around. Steel bulkhead removal/reinstallation or modification will require pre-approval of local ABS Surveyor. (619) 236-1838. b) Remove and dispose of existing refrigerator/freezer. Will not be replacing item. c) Remove and dispose of Gear Locker - adjacent to large four (4) doored Refrigerator. Will not be replacing item. d) Remove existing oven and replace with Combi Oven (Electric Full Size) Vulcan Hart Model# VCE207. (GFM Material, material already onboard USNS MERCY). e) Remove existing Range and replace with Heavy Duty Electric Range Vulcan Hart Model# VR2.(GFM Material, material already onboard USNS MERCY). f) Remove existing Griddle and replace with Heavy Duty Electric Range(Griddle) Vulcan Hart Model# V5. (GFM Material, material already onboard USNS MERCY). g) Remove existing Two Section Reach-in Refrigerator and replace with Tulsen #RHT232NUT-HHS. (GFM Material, material already onboard USNS MERCY). h) Remove existing ROFRY Machine and table unit. Replace with Stainless Steel Cabinet measuring approximately 29? L X 30? W X 31?H. With two double-pan stainless steel doors on both sides of counter. Interior of counter to have adjustable shelves. New Counter top will measure approximately 10?3? L X 30? W and have a continuous marine edge. i) Pass-thru Window Area. Remove existing Plexiglas and existing tray slide and cap serving line with stainless steel U-channel and fabricate and install one each new stainless steel passover shelf with stainless steel framed Sneeze shield assembly approximately 12?8?L. (Would like the same sneeze shield designed assembly that the MTF Galley has onboard USNS MERCY (loc: 02-33-0). j) Lowerator Cabinet modify to use 2 stacks of oval plates. MSC representative will provide size of oval plates. k) Request provide Stainless Sheet to cover the existing holes located next to Lowerator Cabinet. Dimensions: 29? L 23? W. l) Modify Steam Tray to have 3 holes for long pans and 2 holes for soup/gravy pots. m) All equipment replaced will have new water/steam and Drain Piping replaced up and thru existing Bulkheads and Decks replace associated penetration sleeves. Piping to be tested and witnessed by Chief Engineer or designee to 125 psi. n) Existing Steam Kettle is to remain in place. o) Existing deck is to remain and care is to be taken not to damaged. (non skid sealing surface will be put on by aboard MilDept at conclusion) p) Work to be done to satisfaction of Supply Officer , Chief Engineer and MSC Rep. POC for equipment, ship check is Supply Officer Carie (619) 767-6217 2. Vessel Availability: Ship Check : Please coordinate directly with the Port Engineer (Mr. Paul Crovo) for a date between 10/22/03 and 10/29/03. Mr. Paul Crovo?s phone number is: 619-524-9681 or cell phone number: 619-865-1853. Performance Period: All work is to be completed and approved in 30 days or less. Start date will be directly coordinated with the Port Engineer after award and after all materials have been procured. Base Clearance: for awarded contractor?s personnel will also be directly coordinated through the Port Engineer Paul Crovo PE (619) 524-9681 3. Vessel Location: 32nd St Naval Base , San Diego Ca., Pier #1. This is a total small business set a side
- Place of Performance
- Address: 32nd St Naval Base, San Diego Ca
- Country: USA
- Country: USA
- Record
- SN00458040-W 20031024/031023061246 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |