Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF AUGUST 15, 2003 FBO #0624
SOLICITATION NOTICE

46 -- Grinding, Augering, and Screening Equipment

Notice Date
8/13/2003
 
Notice Type
Solicitation Notice
 
Contracting Office
International Boundary and Water Commission, Information Management Division, Acquisition Division, 4171 North Mesa, Suite C-310, El Paso, TX, 79902
 
ZIP Code
79902
 
Solicitation Number
IBM03Q0037
 
Response Due
9/11/2003
 
Archive Date
9/26/2003
 
Point of Contact
Sherrill Brinkley, Contract Specialist, Phone (915) 832-4713, Fax (915) 832-4192,
 
E-Mail Address
sherrybrinkley@ibwc.state.gov
 
Small Business Set-Aside
Total Small Business
 
Description
The United States Section of the International Boundary and Water Commission (USIBWC) is seeking to make a single award to a contractor to furnish and install grinding, augering, screening, washing and bagging equipment. The equipment is to be installed by the vendor at the Nogales International Wastewater Treatment Plant, 865 Rio Rico Industrial Park, Rio Rico, Arizona 85648. Equipment shall consist of powered rotating screen drums, powered two shaft grinder with single auger lifting assembly that screens and grinds solids, lifts and dewaters them, and disposes of the solids into a solids compaction and washing unit. Compaction and washing shall separate soft organics from ground solids. Solids shall be washed multiple times. Solids shall be dewatered and compacted into a cake form, and using a screw conveyor, be discharged into a bagging system which is attached to the compaction/washing unit. Ultimate disposal shall be into a five (5) cubic yard trash bin provided by USIBWC. System shall be fully automatic with de-jamming sequences and trouble alarming capabilities with all controls, equipment, panels and electrical equipment supplied and installed by contractor. Equipment shall consist of the following AMD Series Auger Monster Model No. AMD6016, Screenings Washer Monster (compaction Version) without Grinder Model No. SWM0018, Discharge Bagging System as manufactured by JWC Environmental or approved equal. Estimated issuance date of RFQ IBM03Q0037 is August 21, 2003 and responses are to be received by 4:00 PM local time on September 11, 2003. Requests for RFQ IBM03Q0037 must be submitted in writing to the International Boundary and Water Commission, United States Section, 4171 North Mesa, C-310, El Paso, Texas 79902-1441, or facsimile to (9l5) 832-4192, or e-mail message to sherrybrinkley@ibwc.state.gov no telephone requests will be accepted. Requests must include business name, point of contact, address, telephone number (include area code), and RFQ number. This requirement is a 100% set-aside for small business concerns. The North American Industry Classification System (NAICS) code is 333319. The applicable small business size standard is 500 employees. The Product Service Code (PSC) is 4630.
 
Record
SN00400056-W 20030815/030813214146 (fbodaily.com)
 
Source
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.