Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 08, 2003 FBO #0617
MODIFICATION

66 -- H252 MECHANICAL/MATERIALS TEST SYSTEM

Notice Date

8/6/2003
 

Notice Type

Modification
 

Contracting Office

Consumer Product Safety Commission, Directorate for Administration, Division of Procurement Services, 4330 East West Highway, Room 517, Bethesda, MD, 20814-4408
 

ZIP Code

20814-4408
 

Solicitation Number

CPSC-Q-03-1305
 

Response Due

8/18/2003
 

Archive Date

9/2/2003
 

Point of Contact

Rose Heidenreich, Contract Specialist, Phone (301) 504-7040, Fax (301) 504-0628, - Donna Hutton, Contracting Officer, Phone (301) 504-7009, Fax (301) 504-0628,
 

E-Mail Address

rheidenreich@cpsc.gov, dhutton@cpsc.gov
 

Description

Amendment to combined synopsis/solicitation for CPSC-Q-03-1305. This corrects the following: the test machine shall be equipped to test in full load ranges of 1000 lbf (4.4 kN) and 5000 lbf (22.2kN). The test frame shall have a minimum vertical test space of approximately 50 in. (800mm). Under Special Requirements: The test machine shall be capable of testing a bicycle frame in a vertical position and a large diameter bicycle wheel in a horizontal position. To accomplish this, the test frame shall have a minimum vertical test space of approximately 50 in. (1.27m) and a minimum horizontal space between the columns of approximately 32 inc. (800 mm). All other requirements are the same. No RFQ will be issued. This notice constitutes the RFQ. There will be no change in response date. All responsible sources may submit their written quotes by fax, or e-mail to rheidenreich@cpsc.gov.
 

Place of Performance

Address: CONSUMER PRODUCTS SAFETY COMMISSION, 10901 DARNESTOWN ROAD, GAITHERSBURG, MD

Zip Code: 20878-2611

Country: USA
 

Record

SN00393204-W 20030808/030806213045 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |