MODIFICATION
30 -- 1 TO 5 SPEED INCREASING GEAR (TRANSMISSION)
- Notice Date
- 7/15/2003
- Notice Type
- Modification
- Contracting Office
- NASA/George C. Marshall Space Flight Center, Procurement = Office, Marshall Space Flight Center, AL 35812
- ZIP Code
- 35812
- Solicitation Number
- 4200017637
- Response Due
- 7/29/2003
- Archive Date
- 7/14/2004
- Point of Contact
- Eunice M Adams, Contract Specialist, Phone (256) 544-0110, = Fax (256) 544-6062, Email Eunice.Adams@msfc.nasa.gov - Marlyce E. = Alexander, Contract Specialist, Phone (256) 544-8344, Fax (256) 544-6062, Email marlyce.alexander@msfc.nasa.gov
- E-Mail Address
-
Email your questions to Eunice M Adams
(Eunice.Adams@msfc.nasa.gov)
- Description
- This is a modification to the synopsis entitled 1 to 5 Speed Increasing Gear (Transmission) PR # 4200017637 which was posted on June = 24, 2003. You are notified that the following changes are made:=20 1. Government requires a transmission housing containing a bevel gear = set with a 1:1 ratio, horizontal input and vertical output shafts, support bearings and lubrication system. 2. The bevel gear transmission will be driven by the output shaft of = an existing transmission: =B7 Bevel Gear Transmission must bolt to an AND 20007 type XVII C, -D, = -E, & F flange =B7 Input shaft of the bevel gear transmission must mate to a 1.764 = inch diameter female spline (26 teeth, 30 degree pressure angle, 16/32 = pitch, 1.626 P.D.) 3. Transmission will be used to drive a hydrostatic bearing test rig = rotor for two hours a day and five days a week. 4. Transmission will see negligible thrust loads. 5. 1:1 ratio bevel gear set. 6. Maximum rotational speed is 18000 RPM. 7. Minimum rotational speed is 4000 RPM. 8. Transmission must handle 300 HP (87.5 ft*lb) at 18000 RPM. 9. Horizontal input and vertical output shafts 10. Transmission must be painted to prevent rust in a room that is not climate controlled 11. Unit must be complete: =B7 Any lubrication pumping, lubrication cooling, and lubrication = reservoir requirements must be provided by the manufacturer and included in the quote =B7 Transmission must be fully assembled and ready for test work upon arrival The due date for responses is extended. Documents related to this procurement are available over the Internet = and are in Microsoft Office 97 format and will reside on a World Wide Web = (WWW) server, which may be accessed using a WWW browser application. The Internet site, or URL, for the NASA/MSFC Business Opportunities home = page is <A HREF=3D"http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=3DCL&pin=3D6= 2"> http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=3DCL&pin=3D62</A> = Offerors are responsible for monitoring this site for the release of = the solicitation and any amendments. Potential offerors are responsible = for downloading their own copy of the solicitation and amendments (if any). =20
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=3DD&pin=3D62#10= 6308)
- Record
- SN00372140-W 20030717/030715214117 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |