MODIFICATION
56 -- Seven Devils Aggregate
- Notice Date
- 6/26/2003
- Notice Type
- Modification
- Contracting Office
- Department of Agriculture, Forest Service, R-1 Nez Perce National Forest, Route 2, Box 475, Grangeville, ID, 83530
- ZIP Code
- 83530
- Solicitation Number
- RFQ-R1-17-3-32
- Response Due
- 7/11/2003
- Archive Date
- 7/26/2003
- Point of Contact
- Pete Ruppel, Contracting Officer, Phone 208-476-8259, Fax 208-476-8288,
- E-Mail Address
-
pruppel%40fs.fed.us
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. RFQ-R1-17-3-32. The solicitation is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-12. The NAICS code is 421320. Line Item 1 - 3500 Tons of Crushed Aggregate. Line Item 2 is an Optional Item for 1500 Tons of Crushed Aggregate. Material: Crushed Aggregate, Type Surfacing Grading D (Certified Weed Free), in accordance with FS Standard Specs for Construction of Roads and Bridges, 1985 edition. Material Spec Section 703 attached.. Deliver Line Item 1 and any awarded portion of Line Item 2 by September 30, 2003 to stockpile site at McClinery Ridge Quarry. Site is accessed via Road 517 located 1 mile north of Riggins, ID on Hwy 95. Approximately 11.6 miles on Rd. 517 to the junction of Rd 517F. On Rd.. 517F approximately 0.4 miles to quarry. Include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications Commercial Items, with this offer. The following clauses apply to this acquisition: FAR 52.212-1 (Instructions to Offerors Commercial Items); 52.212-3 (Offeror Representations and Certifications Commercial Items); FAR 53.212-4 Contrat Terms and Conditions Commercial Items); and FAR 52.212-5 (Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items). Written quotations are due at the Nez Perce National Forest, Route 2, Box 475; Grangeville, ID 83530 at 4:30 p.m. on July 11, 2003. Fax (208-983-4098) or email (pruppel@fs.fed.us) quotations may be submitted. Quotations are due not later than 3:30 PM, PDT on July 11, 2003. A completed copy of FAR 52-212.3 (Offeror Representations and Certifications Commercial Items) must be submitted with the quotation. Contact Pete Ruppel at 208-476-8259 for additional information. 703.05 (Reserved) 703.06 Aggregate for Base or Surface Courses (d) Crushed Aggregate. Aggregate for crushed base or surface courses shall be crushed stone, slag, or gravel meeting the requirements shown in table 703-3 unless shown otherwise in the SPECIAL PROJECT SPECIFICATIONS. Unless shown otherwise in the SPECIAL PROJECT SPECIFICATIONS, the crushed aggregate gradation shall meet the requirements of table 703-4 for the grading shown in the SCHEDULE OF ITEMS. Aggregate shall be well graded from coarse to fine within the gradation band. Table 703-3.?Crushed aggregate quality requirements for base or surface courses. Description AASHTO Test Method Requirements Base Surfacing Percent Wear T 96 40 max. 40 max. Durability Index, Coarse and Fine T 210 35 min. 35 min. Liquid Limit T 89 25 max. 35 max. Plasticity Index T 90 6 max. 2-9 max. Dust Ratio: % Passing No. 200 % Passing No. 30 T 11T 27 2/3 max. 2/3 max. Sand Equivalent (Alternative Method Number 2) T 176 35 min. -- When crushed gravel is used, at least 50 percent by weight of the particles retained on the Number 4 sieve shall have at least one fractured face. Naturally fractured faces may be included in the 50 percent requirement, provided the roughness and angularity produce strength characteristics equivalent to mechanically fractured faces. EM 7720-100LL, page 321 April 1, 1985 Table 703-4. ?Crushed aggregate grading requirements for base or surface courses. Sieve Percent Passing (AASHTO T 11 and T 27) Grading A Grading B Grading C Grading D Grading E 3-Inch2-Inch1-1/2-Inch1-Inch?-Inch?-InchNo. 4No. 8No. 30No. 200 100 65-95 40-75 22-45 16-34 8-22 2-10a 100 60-90 44-70 28-50 20-41 9-26 3-12a 100 60-90 30-55 22-43 11-27 3-15a 100 70-98 36-60 25-47 12-31 3-15a 100 70-98 44-70 30-54 15-34 3-15a Sieve Grading F Grading G Grading H Grading J Grading K 3-Inch2-Inch1-1/2-Inch1-Inch?-Inch?-InchNo. 4No. 8No. 30No. 200 10065-9528-7010-350-10a 10050-8527-6015-400-12a 10055-9020-485-200-15a 10070-9825-5516-406-220-15a 10065-9533-6021-428-240-15a Sieve Grading L Grading M Grading N Grading O 6-Inch4-Inch3-Inch2-Inch1-1/2-Inch1-Inch?-Inch?-InchNo. 4No. 8No. 30No. 200 100 10015-45 10015 45 100 a For untreated base used under bituminous materials, Sections 403, 404, 405, 406, and 410, the maximum percent passing the Number 200 sieve shall be eight. For surfacing, the minimum percent passing the Number 200 sieve shall be six. Stockpile limits will be staked by the engineer. Material will be placed within these limits. This may require ramping.
- Place of Performance
- Address: Nez Perce National Forest, Rt.2 Box 475, Grangeville, Idaho County, ID
- Zip Code: 83530
- Zip Code: 83530
- Record
- SN00357541-W 20030628/030626222511 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |