SOLICITATION NOTICE
J -- DRYDOCK REPAIRS FOR TRAINING BOATS
- Notice Date
- 6/26/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- DHS - Direct Reports, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- Reference-Number-DD-TRAININGBOATS
- Response Due
- 7/11/2003
- Archive Date
- 9/1/2003
- Point of Contact
- Cindy Floyd, Contracting Officer, Phone (757)628-4653, Fax (757)628-4676, - Wendy Culbreth, Contract Specialist, Phone (757) 628-4657, Fax (757) 628-4675,
- E-Mail Address
-
cfloyd@mlca.uscg.mil, wculbreth@mlca.uscg.mil
- Description
- The acquisition is for drydock repairs to three 65 FOOT CLASS TRAINING BOATS. The homeport of the training boats is THE USCG Academy located in New London, CT. The performance period for the first boat was originally scheduled for July 01, 2003 through August 15, 2003. However, time constraints will have to push the performance for the first boat later in the year. The second boat?s (64402) performance period is scheduled for September 01, 2003 through October 15, 2003. The third boat?s (64404) performance period is scheduled for November 01, 2003 through December 15, 2003. THIS ACQUISITION IS RESTRICTED AS FOLLOWS: DUE TO THE LACK OF SEA WORTHINESS IN OPEN SEAS, THESE VESSEL?S CANNOT TRANSIT BY WATER OUTSIDE THE MOUTH OF THE THAMES RIVER, NEW LONDON, CT. The work items include but are not limited to: Welding Repairs; Clean Fuel Tanks; Remove, Inspect, and Reinstall Propeller Shaft; Renew Shaft Covering; Straighten Shaft; Renew Water-Lubricated Shaft Bearings; Renew Propeller Shaft Sleeves; Remove, Inspect and Reinstall Propeller; Perform Minor Repairs and Reconditioning of Propeller; Overhaul and Renew Valves; Remove, Inspect, and Reinstall Rudder Assembly; Remove Potable Water Tank; Preserve Weather Decks; Preserve Underwater Body; Preserve Freeboard; Renew Cathodic Protection System; Install Drip Less Shaft Packing; Routine Drydocking; Preserve Lazarette Bilge.. All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. At the present time, the acquisition is expected to be issued under full and open competition procedures. However, in accordance with FAR 19.1305, if your firm is HUBZone certified and intends to submit an offer on this acquisition, please respond by e-mail to cfloyd@mlca.uscg.mil or by fax at (757) 628-4676. Questions may be referred to Cindy Floyd at (757) 628-4653. In your response please include: (a) a positive statement of your intention to submit an offer for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and telephone numbers. At least two references are requested, but more are desirable. Your response is required by 11 July 2003. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone set aside. Failure to submit all information requested may result in a restricted acquisition. A decision on whether this will be pursued as a HUBZone small business set aside or on a restricted basis will be posted on the FedBizOps website at http://www.eps.gov
- Place of Performance
- Address: Contractor's facility
- Record
- SN00357451-W 20030628/030626222408 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |