SOLICITATION NOTICE
43 -- IMPELLER,PUMP,CENTRIFUGAL
- Notice Date
- 3/17/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- DEFENSE SUPPLY CENTER COLUMBUS; MARITIME SOLICITATIONS/AWARDS P.O. BOX 16704; COLUMBUS, OH 43216; US
- ZIP Code
- 00000
- Solicitation Number
- SPE760-03-T-7105
- Archive Date
- 4/30/2003
- Point of Contact
- Richard A Miller, (614)692-1149
- E-Mail Address
-
Email your questions to Richard A Miller
(richarda.miller@dscc.dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- IMPELLER, PUMP, CENTRIFUGAL. COMPOSITE MATERIAL. "QUOTES MUST BE BASED UPON FURNISHING AN ITEM MANUFACTURED BY AN APPROVED SOURCE AND FROM AN APPROVED MATERIAL CITED ON THE DRAWING REFERENCED BELOW. THE CITED DRAWING SPECIFIES WHICH MATERIALS ARE ACCEPTABLE AND PROVIDES INSTRUCTIONS FOR QUALIFYING ADDITIONAL MATERIALS AND SOURCES. OFFERS TO FURNISH MATERIALS OTHER THAN THOSE APPROVED MAY NOT BE CONSIDERED. "FINAL INSPECTION AND ACCEPTANCE OF MATERIAL SHALL BE AT THE ACTUAL MANUFACTURING FACILITY. TECHNICAL INSPECTION IS REQUIRED. THE CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT MATERIAL MEETS ALL TECHNICAL REQUIREMENTS. COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984, DCSC 52.217-9C01)". THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES DLAD 52.246-9000, CERTIFICATE OF QUALITY COMPLIANCE APPLIES. DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT APPLIES. DLAD CLAUSE 52.246-9004, PRODUCT VERIFICATION TESTING, IS HEREBY INCORPORATED, AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY IF THIS SOLICITATION/AWARD CALLS FOR GOVERNMENT INSPECTION AT SOURCE. IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE, HOWEVER, THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO; I.E., THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). MATERIAL FURNISHED SHALL CONTAIN NO MERCURY OR MERCURY COMPOUND AND SHALL BE FREE FROM MERCURY CONTAMINATION ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION.
- Place of Performance
- Address: SEE ADDITIONAL DELIVERY INFO; ; , AA 00000; US
- Zip Code: 00000
- Country: US
- Zip Code: 00000
- Record
- SN00280741-W 20030319/030317213122 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |