Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF MARCH 09, 2003 FBO #0464
SOLICITATION NOTICE

28 -- SPacer Assy

Notice Date
3/7/2003
 
Notice Type
Solicitation Notice
 
Contracting Office
Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
 
ZIP Code
73145-3015
 
Solicitation Number
F34601-03-R-48962
 
Archive Date
5/6/2003
 
Point of Contact
Mike Shirley, Contract Negotiator, Phone 405-739-5391, Fax 405-739-4237, - Charles Murphy, Contract Negotiator,
 
E-Mail Address
michael.shirley@tinker.af.mil, charles.murphy@tinker.af.mil
 
Small Business Set-Aside
Total Small Business
 
Description
Presolicitation Notice Date Submitted: 07 March 2003 OC-ALC/LPKPA DIR CONTRACTING/PROPULSION 3001 STAFF DR STE 2AG1/106C TINKER AIR FORCE BASE OK 73145-3032 SMALL BUSINESS SET ASIDE 28--Spacer Assy SOL F34601-03-R-48962 , OC-ALC/PKXDA TINKER AFB OK 73145-3015, For additional information contact Chuck Murphy/ LPKPA/ [405]739-4441 Item 0001 NSN 2840-00-435-5545RV P/N: 542026, SPACER ASSY. ROTATING MEMBER OF THE ENGINE. MANUFACTURING DIMENSIONS ARE CRITICAL. SNAP DIAMETERS ARE CLOSE TOLERANCE TO MEET STIRINGENT BALANCE AND FIT LIMITS . DIMENSIONS: .441-.442 DIA 16 HOLES BOTH ENDS EQUALLY SPACED AND LOCATED WITHIN .002 OF TRUE POSITION IN RELATION TO DIA. APPROX 19.325 OD X 17.000ID X1.788 IN .THK. MATEIAL: STEEL. FUNCT: ACTS AS A SPACER & AIR SEAL BETWEEN 15th and 16th STG COMP DISKS. NHA: COMP ROTOR. APPL TF33-P5/9/ and P102/102A ENGS C-135 ACFT. 50 Max, 45 Med, 23Min. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 30 March 2005 . Qualification requirements: First article test required. Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) 0001 The approximate issue date will be 24 March 03, and response date will be 21 April 2003. The anticipated award date will be 9 May 2003. Written procedure will be used for this solicitation. To: ELECTRO-METHODS INC, SOUTH WINDSOR, CT 06074-0054, TO: STOWE MACHINE CO INC, WINDSOR, CT 06095-0218, TO: AMBEL PRECISION MFG CORP. BETHEL, CT 06801-0730, TO: BEACON INDUSTRIES INC , BLOOMFIELD, CT 06002-3594, TO: BIRKEN MFG CO, BLOOMFIELD, CT 06002, TO: BEACON INDUSTRIES INC, BLOOMFIELD, CT 06002, and Pratt & Whitney, East Hartford, CT 06118 . All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The Red/Yellow/Green Evaluation will be used to award this contract. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER (405)739-3656. Request for Written Quotation will be issued. The anticipated award date will be 60 days after the issuance of this notice. See Note (s) 1, 23, and 26. POINT OF CONTACT: Charles Murphy, Contract Negotiator, Email charles.murphy@tinker.af.mil Mike Shirley, Contracting Officer, Phone 405-739-5391, Fax 405-739-4237, Email mike.shirley@tinker.af.mil Place of Contract Performance has not been specified.
 
Record
SN00273888-W 20030309/030307213523 (fbodaily.com)
 
Source
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.