SOLICITATION NOTICE
48 -- VALVE,GLOBE
- Notice Date
- 12/27/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- DEFENSE SUPPLY CENTER COLUMBUS; MARITIME SOLICITATIONS/AWARDS P.O. BOX 16704; COLUMBUS, OH 43216; US
- ZIP Code
- 00000
- Solicitation Number
- SPE760-03-T-3738
- Archive Date
- 2/10/2003
- Point of Contact
- Susan Cooper, (614)692-8149
- E-Mail Address
-
Email your questions to Susan Cooper
(Susan.Cooper@dscc.dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- VALVE, GLOBE STOP. 1/2 INCH, ANSI VALVE ASSEMBLIES. CORROSION RESISTANT STEEL MATERIAL, SOCKET WELD ENDS. FIRST ARTICLE TEST I/W NAVY DWG 803-2177525. EXCEPTIONS TO THE DRAWING: MIL-S-18410 REPLACED BY DOD-F-24669, QQ-C-591E REPLACED BY ASTM-B98, AND MIL-S-890 SUPERSEDED MY MIL-S-24093. "CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS." IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE, HOWEVER, THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO; I.E., THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). MERCURY FREE - THE ITEM FURNISHED SHALL CONTAIN NO MERCURY OR MERCURY COMPOUNDS AND SHALL BE FREE FROM MERCURY CONTAMINATION IAW DCSC DWG. 16236 CS-4320-0442, BASIC DATE 16 JULY 87. CERTIFICATE OF QUALITY COMPLIANCE APPLIES - DLAD 52.246-9000 . DLAD CLAUSE 52.246-9004, PRODUCT VERIFICATION TESTING, IS HEREBY INCORPORATED, AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. . CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN NATIONAL STANDARD FOR CALIBRATION - CALIBRATION LABORATIORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS, OR ISO 10012-1, QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR MEASUING EQUIPMENT. "ITEMS SUPPLIED MUST BE FREE OF ASBESTOS. LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE WITH CLAUSE L30 AND PROVISION 4 - CONDITIONS FOR EVALUATION AND ACCEPTANCE OF OFFERS FOR PART NUMBERED ITEMS." FULL AND OPEN COMPETITION APPLY "STANDARD" Supplies manufactured by cage 00859, 29709 or 34889 are acceptable to the Government only if manufactured after September 2001.
- Place of Performance
- Address: SEE ADDITIONAL DELIVERY INFO; ; , AA 00000; US
- Zip Code: 00000
- Country: US
- Zip Code: 00000
- Record
- SN00231183-W 20021229/021227213319 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |