SOLICITATION NOTICE
J -- Shuttle Type Bus
- Notice Date
- 12/9/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Wiesbaden Contracting Center, ATTN: AEUCC-C, CMR 410, Box 741, APO, AE 09096-0741
- ZIP Code
- 09096-0741
- Solicitation Number
- DABN01-03-T-0053
- Archive Date
- 2/21/2003
- Point of Contact
- Roswitha Rostock-Clements, 011-49-611-816-2249
- E-Mail Address
-
Email your questions to Wiesbaden Contracting Center
(clementsr@rcc.wbn.usacce.army.mil)
- Small Business Set-Aside
- N/A
- Description
- NA WCC intends to competitively award a FFP order for a shuttle type bus, minimum capacity 15 passenger, modified with armoring material (special protected). The contractor shall provide the vehicle modified with all opaque and transparent armor materials. T he vehicle (like Ford F-550 or Chevrolet C-5500 cutaway), to be furnished under the contract shall be model year 2002/2003; gasoline engine, minimum: V-8 cylinder, automatic transmission, air conditioning. Ballistic classification: Minimum ballistic prot ection shall provide against 7.62 East Block ammunition (7.62 x 39, M43, SC) fired from a rifle and be in accordance with testing procedures utilized by the Bundeskriminalamt (BKA), Beschussamt Ulm/Mellrichstadt, Germany and/or U.S. testing certification p rocedures. All opaque and transparent armor shall completely protect vehicle?s interior driver and passenger zones including roof and floor areas. Transparent armor shall be of one-piece construction with anti-spall inner layer. Transparent armor shall be PPG, Isoclima, Triplex or Sully, of glass-plastic (polycarbonate) , laminated construction and shall have a material alone capability of meeting or exceeding the ballistic protection specified above. Armoring of entire floor area must meet a minimum pr otection level acceptable to withstand blasts underneath the vehicle from two (2) DM 51 German ordnance, grenades (wired together) and/or similar blasts. Exposed/fraying edges will not be accepted. Run flat tire inserts to allow vehicle to travel at a hig h rate of speed after puncture. Only those opaque and transparent armor materials tested by an armor test laboratory (e.g. H.P. White, USA, or Beschussamt Mellrichstadt/Ulm, Germany) and having received certification as having met the U.S. Navy armor mate rial standard articulated by the U.S. Department of State shall be used in the special protected vehicle fabrication. The U.S. Government reserves the right to exclude any vehicle offered that does not fit in with the vehicle operating environment due to security and/or political ramifications. The Contractor is required to have authorized maintenance/repair and service facilities throughout Europe and South America or access to. Vehicle shall be performed/delivered FOB Origin not later than 120 days aft er arrival of the vehicle at the contractor?s facility. An earlier performance/delivery time is desired. Acquisition is being conducted IAW requirements of FAR Part 13, Subpart 13.5 ? Test Program for Certain Commercial Items. Anticipated issue date of the RFQ is 11 Dec 02. Interested parties may request a copy of the SOL from the named OFC (email/fax). Telephonic requests will not be honored. Receipt of written requests will be confirmed by the POC within 48 hours, request shall include the requestor ?s Tel and Fax No. and possibly an email address. POC: Roswitha Rostock-Clements, Contract Specialist, clementsr@rcc.wbn.usacce.army.mil , Fax: 011-49-(0)611-816-2254.
- Place of Performance
- Address: Wiesbaden Contracting Center ATTN: AEUCC-C, CMR 410, Box 741 APO AE
- Zip Code: 09096-0741
- Country: EU
- Zip Code: 09096-0741
- Record
- SN00219007-W 20021211/021209213445 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |