SOLICITATION NOTICE
15 -- BELL CRANK
- Notice Date
- 7/5/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Defense Logistics Agency, Logistics Operations, Defense Supply Center Richmond, 8000 Jefferson Davis Highway, Richmond, VA, 23297-5000
- ZIP Code
- 23297-5000
- Solicitation Number
- SP0475-02-R-5719
- Response Due
- 8/29/2002
- Archive Date
- 9/13/2002
- Point of Contact
- Sherrie Johns, Contract Specialist (Contractor), Phone (804)279-2455, Fax (804)279-4183, - Peggy Robinson, Contract Specialist, Phone 804-279-6405, Fax 804-279-6078,
- E-Mail Address
-
sjohns@dscr.dla.mil, probinson@dscr.dla.mil
- Small Business Set-Aside
- Total Small Business
- Description
- Bell Crank; NSN 1680-00-123-9480. Technical Data Package Availability: An Unrestricted Technical Data Package Is Available At DSCR For This NSN. To Obtain A Copy, Submit Request To DSCR Via Internet, Internet Address Is: Http://www.dscr.dla.mil/tdmd (All Lowercase, Please). Notes: Special Instructions For Nsn: 1680-00-123-9480 The Following Specifications/Standards, Etc., Will Be Used Ilo The Data Indicated. The Superceded Data Will Not Be Furnished Unless So Indicated. 1. Cadmium Plate Per Mil-Std-870, Type Ii, Class 2 Ilo Fp-49. 2. Install Bushings With Wet Zinc Chromate Primer Per Tt-P-1757 Using Best Shop Procedures Ilo Cp-4 And Fh-19. 3. Heat Treat, Carburization Or Decarburization And Stress Relief Per Ams-H-6875 Ilo Ht-15, Ht-3 And Mmp-175. 4. Magnetic Particle Inspection Per Astm E1444 ILO It-32.1, It-32.3 And T-61. Use Full Wave Ac Current, Wet Continuous Method, Fluorescent Type With The Following Acceptance/Rejection Criteria: No Defects Allowed. Note: This Part Is In Inspection Classification Grade A, IAW Mil-Std-1907. The Intent Of No Defects Allowed Is That The Non-Destructive Inspection Is Conducted IAW The Appropriate Specification Astm E1444 To The Sensitivity Level Required And There Will Be No Indications Allowed. The Inspection Individual Will Be Certified To At Least Level Ii, Per Nas 410. 5. Shotpeen Per Sae Ams-S-13165 Ilo Ma-57. 6. Positional And Geometrical Tolerances Per Asme Y14.5 Ilo 20y201. 7. Identify And Mark Per Mil-Std-130 Ilo Im-8.` 8. Specs 3-40500 And Nfs-76 Are Not Applicable. 9. Northrop Procurement Data Lists And Applications Lists Are Not Required To Manufacture This Item And Should Be Disregarded. 10.Use Mil-S-8844 Ilo Mil-S-5000. 11. Finish Per The Following: A. One Coat Epoxy Primer Per Mil-P-23377, Type I, Class 1. B. Two Coats Topcoat Per Mil-C-85285, Type I, Color White 17925 Per Fed-Std-595. Or C. One Coat Epoxy Primer Per Mil-P-85582, Type I Class 2. D. Two Coats Topcoat Per Mil-C-85285, Type I Color White 17925 Per Fed-Std-595. ...End Of Special Instructions... Sources: Bf Goodrich Co Cage 13002; Coltec Industries Inc. Cage 17576; Apex Manufacturing Co Cage 2v243; Bemsco Inc. Cage 29560; All Tools Inc. Cage 32168; Heroux Inc. Cage 36164; Kaiser Fluid Tech. Cage 99215; Critical Application Item. Mark IAW Mil-Std-130k, Dated 15 Jan 00. Configuration Control Applies. Origin Inspection Required. First Article/Preproduction Approval Required. Government Testing Required. Sample Quantity Shall Consist Of Two (2) Complete Units. Testing Is For Conformance To Drawing Specifications And Shall Include: Dimensional Verification, Destructive Analysis Pf Pme (1) Unit To Determine Plating, Material Identification, Heat Treatment, And Hardness, And May Include Fit, Form, And Function Of One (1) Unit On An Operational Aircraft. I/A/W Drawing Nr (76823) 6-40651 Rev J. Basic Dtd 01/26/75. Requested delivery is 160 Days After First Article Testing, and 90 DARO for the delivery of the First Article. The basic quantity is 101 each. The solicitation will include a 100% option quantity. The final award decision may be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. You must fill out a complete solicitation package in order to be evaluated. A letter RFP (offer) is not acceptable unless you are quoting IAW a BOA. EBB or EDI quotations are not acceptable. Requests for Proposals (RFP) will be available on the procurement gateway at http://progate.daps.mil. Contractors who have received hard copies in the past will now receive e-mail notifications if: an email address is listed in the CFR or you have registered your email address via the DSCR award/solicitation email registration at http://www.dscr.dla.mil/proc/register.htm. A solicitation will be issued on 29 July 2002.
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/DLA/J3/DSCR/SP0475-02-R-5719/listing.html)
- Record
- SN00111601-F 20020707/020706082052 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |