MODIFICATION
28 -- Spacer, Seal; Appl: F101 Engine
- Notice Date
- 5/22/2002
- Notice Type
- Modification
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- F34601-02-Q-48934
- Response Due
- 6/24/2002
- Archive Date
- 9/30/2002
- Point of Contact
- Karen Yarber, Contracting Officer, Phone (405) 739-5491, Fax (405) 739-5493,
- E-Mail Address
-
karen.yarber@tinker.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- Date Submitted: 03-Apr-2002 OC-ALC/LPDPB DIR CONTRACTING/PROPULSION 3001 STAFF DR STE 2AF1/109H TINKER AIR FORCE BASE OK 73145-3032 SEAL, SPACER; SOL F34601-02-Q-48934. SOLICITATION POSTING APPROXIMATE 23 May 2002. OC-ALC/PKXDA TINKER AFB OK 73145-3015, For additional information contact, Karen Yarber/LPDPB/[405]739-5491. Item 0001 NSN 2840-01-146-7482PR P/N: 9527M70P03, This item is 22 IN OD at one end X 18 IN ID at the other end X 3 IN Wide, Material: Rene 41 forged. Description: The seal is a circular shaped configuration with a forward and AFG Flange consisting of numerous bolt Holes. Function: To separate the two LPT Disks and provides an interstage Seal to control air leakage, B1B ACFT. Qty: 11 EA. Applicable to: F101 Engine. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 31 Aug 2002, 41 ea. . Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) 0001. The approximate response submission date will be 28 JAN 2002. Written procedure will be used for this solicitation. To: Union Machine, Groveland MA; Demusz, E. Hartford CT; EMI, So Windsor, CT; Dover Tool Co; Bridgeport CT. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation, which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to Karen Yarber @ OC-ALC/LPDPB, Tinker AFB OK 73145-3032, FAX NUMBER (405)739-5493. See Note (s) 1, 26.
- Record
- SN00081011-W 20020524/020522213810 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |