SOLICITATION NOTICE
13 -- REMOVER
- Notice Date
- 5/21/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, OO-ALC, OO-ALC/PKXD 6038 Aspen Ave (Bldg 1289), Hill AFB, UT, 84056
- ZIP Code
- 84056
- Solicitation Number
- F42630-02-R-3147
- Response Due
- 6/3/2002
- Archive Date
- 8/2/2002
- Point of Contact
- Dan Olsen, Contracting Officer, Phone 801-777-6402, - Roger Porter, Ombudsman, Phone 801-777-6991,
- E-Mail Address
-
Dan.Olsen@hill.af.mil, roger.porter@hill.af.mil
- Description
- This was previously synopsized under solicitation number F42630-02-Q-3129. PR NR: FD2020-02-60609. Item 0001 NSN 1377-01-057-5431ES P/N: 2820100-2, P/N 1517-002 Rocket canopy remover (right side) is a life support device used in the F16 acft escape sys to produce thrust/impulse required to jettison canopy hatch. Uses a solid propellant and is approx 13" long by 1 1/2" diameter. 28ea. Applicable to: F16. Delivery: 30 SEP 2003 28 ea Item 0002 NSN 1377-01-058-0122ES Remover P/N: 2820100-1, P/N 1517-001 Rocket canopy remover (left side) is a life support device used in the F16 acft escape sys to produce thrust/impulse required to jettison canopy hatch. Uses a solid propellant and is approx 13" long by 1 1/2" diameter. 28ea. Applicable to: F16. Delivery: 30 SEP 2003 28 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) 0001 & 0002. The anticipated award date will be 03 JUN 2002. Electronic procedure will be used for this solicitation. To: OEA Aerospace Inc, Fairfield Ca 94533-0000. To: B F Goodrich Aerospace, Phoenix Az 85027-7899.Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman listed below if your concerns are not satisfied by the contracting officer (801)777-6991. ATTENTION: Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity. Information on registration and annual confirmation requirements may be obtained by calling 1-888-227-2423, or via the Internet at http://www.ccr.gov This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. See Note (s) 26. This acquisition involves data that are subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center (DLSC) shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions. Contact the Defense Logistics Services Center, 74 Washington Avenue N., Battle Creek, Michigan 40917-3084 (1-800-352-3572) for further information on the certification process. You must submit a copy of your approved DD Form 2345, Military Critical Technical Data Agreement, with your request for the solicitation
- Web Link
-
Link to FedBizOpps document.
(http://www.eps.gov/spg/USAF/AFMC/OOALC/F42630-02-R-3147/listing.html)
- Record
- SN00080294-F 20020523/020521213108 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |