SPECIAL NOTICE
80 -- Coating Compound
- Notice Date
- 1/28/2002
- Notice Type
- Special Notice
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131
- ZIP Code
- 64131
- Solicitation Number
- MPN-B-A4342-2
- Response Due
- 2/5/2002
- Archive Date
- 2/20/2002
- Point of Contact
- Marty Daniells, Contract Specialist, Phone 816-823-1325, Fax 816-926-3678, - Marty Daniells, Contract Specialist, Phone 816-823-1325, Fax 816-926-3678,
- E-Mail Address
-
marty.daniells@gsa.gov, marty.daniells@gsa.gov
- Description
- One Purchase order totalling 24,780 lbs., QPL required. 8030-01-324-4457 UI: LB COATING COMPOUND: DESCRIPTION In accordance with Military Specification MIL-C-81904, Coating Compound, Thermal Insulation, Ablative, dated May 31, 1991 and Amendment 1, dated August 24, 1992. QPL qualification required. Component A only: polyester base resin Color: ghost gray, FED-STD-595 Color 36375 Size: The product shall be furnished in 590 lb quantities in new, straight-sided, cylindrical, steel drums of the type normally used for this product provided that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality, or purity of the contents. The filled drums shall be closed in a manner that will insure that the contents will not spill or leak from the containers during shipment, handling, storage, and redistribution. The drums shall, as a minimum, meet the applicable requirements of the National Motor Freight Classification, Uniform Freight Classification, and Department of Transportation regulations. Shelf life code: 1 (3 months) Maximum age on delivery: 21 days EXCEPTION(S) TO TECHNICAL DOCUMENT 1. Remove MIL-P-87938 as an applicable document under Military in Paragraph 2.1.1. 2. Change paragraph 3.4.2 as follows: 3.4.2 Component B (Catalyst). Component B is a composition of methyl ethyl ketone peroxide containing glycerine. The glycerine content shall not exceed 9% by weight of the solution. The component B shall conform to the requirements as stated below: PRESENT TABLE 3. Add Paragraphs 4.6.3, 4.6.3.1, 4.6.3.2, and 4.6.3.3 as follows: 4.6.3 Component B (Catalyst) Tests. 4.6.3.1 Active Oxygen. The active oxygen content shall be determined using the following method: Thoroughly mix the solution prior to withdrawing samples. Prepare glass stoppered 125 ml Erlenmeyer flasks by adding 20 ml of glacial acetic acid then passing carbon dioxide into the acid in each flask for two minutes. Weigh to the third decimal point approximately 0.2 gram samples into these flasks. Add 10 ml of KI solution (10 grams KI in 20 ml water) and let stand in the dark for 15 minutes. Add 10 ml water, and titrate with 0.1N sodium thiosulfate to colorless endpoint. A blank shall also be run and subtracted from the sample titration before calculation. %Active Oxygen = [(ml thio - ml blk) x N x 0.008 x 100]/sample weight; N = normality of sodium thiosulfate solution. 4.6.3.2 Specific Gravity. Specific gravity shall be determined in accordance with ASTM D 891. 4.6.3.3 Refractive Index. Refractive index shall be determined in accordance with Method 4371 of Federal Test Method Std. No. 141. 4. Renumber present paragraphs 4.6.3 through 4.6.12. 5. If previously qualified product has changed manufacturer, the current manufacturer shall certify that the original qualifying product and formula has not been changed. ITEM MARKING Special marking shall include: (1) lot or batch number (2) dates of manufacture and reinspection (3) manufacturer's name and part number (4) instructions for use, thinning, mixing, etc. on unit containers only (5) instructions for storage, ie. do not freeze, refrigerate, etc. (6) marking required by specification: para. 5.3.1.1 and Amend. 1 Component A (resin) containers para. 5.3.1.2 and Amend. 1 Component B (catalyst) containers para. 5.3.2 application instructions MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. Please include MSDS with your quote.
- Record
- SN20020130/00019483-020128210350 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(will not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |