Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF DECEMBER 08, 2001 FBO #0006
PRESOLICITATION NOTICE

13 -- CUTTER, REEFING LINE

Notice Date
12/6/2001
 
Notice Type
Presolicitation Notice
 
Contracting Office
Department of the Air Force, Air Force Materiel Command, OO-ALC, OO-ALC/PKXD 6038 Aspen Ave (Bldg 1289), Hill AFB, UT, 84056
 
ZIP Code
84056
 
Solicitation Number
F42630-02-R-0153
 
Response Due
1/23/2002
 
Archive Date
4/23/2002
 
Point of Contact
Linda Woodall, Procurement Technician, Phone 801-775-2093
 
E-Mail Address
linda.woodall@hill.af.mil
 
Description
PR NUMBER FD2020-02-60410. Item 0001 NSN 1377-01-332-2379ES P/N: CI-1.15, Mechanically actuated miniature initiator, actuated by application of pulling force on initiator pin. This action compresses a string which is released after Initiator pin is withdrawn. Cartridge propellant, once ignited, burns and prod- ces gas pressure, length 4.7 in, dia.8 in. Steel. When actuated provides gas pressure to begin ejection sequence (ACCES II Ejection Seat). 2403ea. Applicable to: Common. Destn: FB2172. Delivery: 31 JAN 2003 2403 ea Item 0002 NSN 1377-01-332-2379ES Cutter, Reefing Line P/N: CI-1.15, Mechanically actuated miniature initiator, actuated by application of pulling force on initiator pin. This action compresses a string which is released after Initiator pin is withdrawn. Cartridge propellant, once ignited, burns and prod- ces gas pressure, length 4.7 in, dia.8 in. Steel. When actuated provides gas pressure to begin ejection sequence (ACCES II Ejection Seat). 14ea. Applicable to: Common. Destn: FMS COUNTRIES. Delivery: 30 MAY 2003 14 ea Item 0003 NSN 1377-01-332-2379ES Cutter, Reefing Line P/N: CI-1.15, Mechanically actuated miniature initiator, actuated by application of pulling force on initiator pin. This action compresses a string which is released after Initiator pin is withdrawn. Cartridge propellant, once ignited, burns and prod- ces gas pressure, length 4.7 in, dia.8 in. Steel. When actuated provides gas pressure to begin ejection sequence (ACCES II Ejection Seat). 325ea. Applicable to: Common. Destn: FMS COUNTRIES. Delivery: 27 FEB 2004 325 ea Item 0004 NSN 1377-01-332-2379ES Cutter, Reefing Line P/N: CI-1.15, Mechanically actuated miniature initiator, actuated by application of pulling force on initiator pin. This action compresses a string which is released after Initiator pin is withdrawn. Cartridge propellant, once ignited, burns and prod- ces gas pressure, length 4.7 in, dia.8 in. Steel. When actuated provides gas pressure to begin ejection sequence (ACCES II Ejection Seat). 20ea. Applicable to: Common. Destn: FMS COUNTRIES. Delivery: 31 MAR 2003 20 ea Item 0005 NSN 1377-01-332-2379ES Cutter, Reefing Line P/N: CI-1.15, Mechanically actuated miniature initiator, actuated by application of pulling force on initiator pin. This action compresses a string which is released after Initiator pin is withdrawn. Cartridge propellant, once ignited, burns and prod- ces gas pressure, length 4.7 in, dia.8 in. Steel. When actuated provides gas pressure to begin ejection sequence (ACCES II Ejection Seat). 62ea. Applicable to: Common. Destn: FMS COUNTRIES. Delivery: 31 JAN 2003 62 ea Item 0006 NSN 1377-01-332-2379ES Cutter, Reefing Line P/N: CI-1.15, Mechanically actuated miniature initiator, actuated by application of pulling force on initiator pin. This action compresses a string which is released after Initiator pin is withdrawn. Cartridge propellant, once ignited, burns and prod- ces gas pressure, length 4.7 in, dia.8 in. Steel. When actuated provides gas pressure to begin ejection sequence (ACCES II Ejection Seat). 10ea. Applicable to: Common. Destn: FMS COUNTRIES. Delivery: 30 APR 2003 10 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) 0001-0017 There are 11 additional items(s) in FSC(s) 1377. Electronic procedure will be used for this solicitation. See our Web page. To: Roberts Research Laboratory, Torrance Ca 90505-4027. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Roger Porter if your concerns are not satisfied by the contracting officer (801)777-6991. ATTENTION: Contractor must be registered with Central Contractor Registration to be eligible for contact award or payment from any DOD activity. Information on registration and annual confirmation requirements may be obtained by calling 1-888-227-2423, or via the Internet at http://www.ccr2000.com This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. This acquisition involves data that are subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center (DLSC) shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions. Contact the Defense Logistics Services Center, 74 Washington Avenue N., Battle Creek, Michigan 40917-3084 (1-800-352-3572) for further information on the certification process. You must submit a copy of your approved DD Form 2345, Military Critical Technical Data Agreement, with your request for the solicitation. See Note (s) 22. Click here to obtain/view a solicitation.
 
Record
SN20011206/00001306-011207190936 (fbodaily.com)
 

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.